American National Standard requirements for pad-mounted, compartmental-type, self-cooled, single-phase distribution transformers with high-voltage bushings, high-voltage, 34 500 GrdY/19 920 volts and below, low-voltage, 240/120 volts, 167 kVA and smaller
American National Standard requirements for underground-type three-phase distribution transformers, 2500 kVA and smaller, high voltage 24 940GrdY/14 400 volts and below, low voltage 480 volts and below
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000170851 / 1978-10-03
Date of Publication:
August 30, 1978
Date of Creation:
1978
Title:
American National Standard requirements for underground-type three-phase distribution transformers, 2500 kVA and smaller, high voltage 24 940GrdY/14 400 volts and below, low voltage 480 volts and below : A N S I C57.12.24-1978 / Secretariat, Edison Electric Institute, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Imprint:
New York : ANSI, c1978.
Description:
11 p.
Variant title:
American National Standard requirements for underground-type three-phase distribution transformers
Other Title:
Requirements for underground-type phase distribution, 2500kVA and smaller, high voltage 24 940GrdY/14 400 volts ...
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
Edison Electric Institute
Institute of Electrical and Electronics Engineers (167 documents)
example document: Digest of papers
National Electrical Manufacturers Association (387 documents)
example document: Material handling (industrial truck) battery charges
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for gaseous radioactive waste processing systems for light water reactor plants
|
|
Institute of Electrical and Electronics Engineers (167 documents)
example document: Digest of papers
|
|
National Electrical Manufacturers Association (387 documents)
example document: Material handling (industrial truck) battery charges
|
|
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for gaseous radioactive waste processing systems for light water reactor plants
|
|
American National Standard terminal markings and connections for distribution and power transformers
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000235007 / 1979-05-08
Date of Publication:
January 15, 1979
Date of Creation:
1978
Date in Notice:
notice: 1978
Title:
American National Standard terminal markings and connections for distribution and power transformers : ANSI C57.12.70-1978, revision of ANSI C57.12.70-1964 (R1971) / secretariat, Edison Electric Institute, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Basis of Claim:
New Matter: additions, revisions & updating.
Previous Registration:
Prev. reg., 1965.
Imprint:
New York : American National Standards Institute, c1978.
Description:
20 p.
Other Title:
Terminal markings and connections for distribution and power transformers
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
Edison Electric Institute
Institute of Electrical and Electronics Engineers (167 documents)
example document: Proceedings technology of object-oriented languages and systems tools 29, June 7-10, 1999 Nancy, France
National Electrical Manufacturers Association (387 documents)
example document: American national standard for wet-process porcelain insulators--high-voltage pin type
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for mechanical demand registers
Institute of Electrical and Electronics Engineers (167 documents)
example document: Proceedings technology of object-oriented languages and systems tools 29, June 7-10, 1999 Nancy, France
National Electrical Manufacturers Association (387 documents)
example document: American national standard for wet-process porcelain insulators--high-voltage pin type
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for mechanical demand registers
American National Standard requirements for underground-type single-phase distribution transformers, with separable insulated high voltage connectors, 100 kVA and smaller, high voltage 24 940GrdY/14 400 volts and below, low voltage 240/120
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000259912 / 1979-04-24
Date of Publication:
August 30, 1978
Date of Creation:
1978
Title:
American National Standard requirements for underground-type single-phase distribution transformers, with separable insulated high voltage connectors, 100 kVA and smaller, high voltage 24 940GrdY/14 400 volts and below, low voltage 240/120 : A N S I C57.12.23-1978 / secretariat, Edison Electric Institute, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Basis of Claim:
New Matter: new, rev. & updated material throughout.
Previous Registration:
Prev. reg. 1Jun70.
Imprint:
New York : The Institute, c1978.
Description:
8 p.
Variant title:
American National Standard requirements for underground-type single-phase distribution transformers
Other Title:
Requirements for underground-type single-phase distribution transformers
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
American National Standards Institute, Inc. (652 documents)
example document: American National Standard method for determining free cyanide in photographic effluents
Edison Electric Institute (59 documents)
example document: Coastal zone '80
Institute of Electrical and Electronics Engineers (167 documents)
example document: 1998
National Electrical Manufacturers Association (387 documents)
example document: American national standard for electric lamps--P28 single-contact medium prefocus based projection lamps for base-down operation--dimensions
example document: American National Standard method for determining free cyanide in photographic effluents
Edison Electric Institute (59 documents)
example document: Coastal zone '80
Institute of Electrical and Electronics Engineers (167 documents)
example document: 1998
National Electrical Manufacturers Association (387 documents)
example document: American national standard for electric lamps--P28 single-contact medium prefocus based projection lamps for base-down operation--dimensions
American National Standard preferred voltage ratings for alternating-current electrical systems and equipment operating at voltages above 230 kilovolts nominal
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000317449 / 1979-03-08
Date of Publication:
November 5, 1978
Date of Creation:
1978
Title:
American National Standard preferred voltage ratings for alternating-current electrical systems and equipment operating at voltages above 230 kilovolts nominal : A N S I C92.2-1978 : revision of C92.2-1976 : approved Oct. 4, 1978 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Basis of Claim:
New Matter: "new, rev., and updated material throughout."
Previous Registration:
Prev. reg. 1976, A798611.
Imprint:
New York : The Institute, c1978.
Description:
2 p.
Variant title:
American National Standard preferred voltage ratings for alternating-current electrical systems and equipment operating
Other Title:
Preferred voltage ratings for alternating-current electrical systems and equipment operating at voltages above 230 ...
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
Institute of Electrical and Electronics Engineers
National Electrical Manufacturers Association (387 documents)
example document: Energy management guide for selection and use of single-phase motors
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for radiological emergency preparedness exercises for nuclear power plants
National Electrical Manufacturers Association (387 documents)
example document: Energy management guide for selection and use of single-phase motors
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for radiological emergency preparedness exercises for nuclear power plants
American National Standard for conformance testing of metal-enclosed low-voltage A C power circuit breaker switchgear assemblies
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000354640 / 1979-10-02
Date of Publication:
September 25, 1979
Date of Creation:
1979
Title:
American National Standard for conformance testing of metal-enclosed low-voltage A C power circuit breaker switchgear assemblies : A N S I C37.51-1979 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Imprint:
New York : ANSI, 1979.
Description:
12 p.
Variant title:
American National Standard for conformance testing of metal-enclosed low-voltage A C power circuit
Other Title:
Conformance testing of metal-enclosed low-voltage A C power circuit breaker switchgear assemblies
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
Institute of Electrical and Electronics Engineers (167 documents)
example document: Satellite communications in the next decade
National Electrical Manufacturers Association (387 documents)
example document: Energy management guide for selection and use of single-phase motors
American National Standards Institute, Inc. (652 documents)
example document: American national standard for unrecorded single-disk, double-density cartridge (front loading, 2200 B P I, 200 T P I), general, physical, and magnetic requirements
example document: Satellite communications in the next decade
National Electrical Manufacturers Association (387 documents)
example document: Energy management guide for selection and use of single-phase motors
American National Standards Institute, Inc. (652 documents)
example document: American national standard for unrecorded single-disk, double-density cartridge (front loading, 2200 B P I, 200 T P I), general, physical, and magnetic requirements
American National Standard requirements for electrical control for A C high-voltage circuit breakers rated on a symmetrical current basis or a total current basis
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000354643 / 1979-10-22
Date of Publication:
October 8, 1979
Date of Creation:
1979
Title:
American National Standard requirements for electrical control for A C high-voltage circuit breakers rated on a symmetrical current basis or a total current basis : A N S I C37.11-1979, revision of A N S I C37.11-1972 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Basis of Claim:
New Matter: "new, rev. & updated material throughout."
Previous Registration:
Prev. reg. 1972, A362002.
Imprint:
New York : ANSI, 1979.
Description:
16 p.
Variant title:
American National Standard requirements for electrical control for A C high-voltage circuit breakers
Other Title:
Requirements for electrical control for A C high-voltage circuit breakers rated on a symmetrical current basis
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
Institute of Electrical and Electronics Engineers
National Electrical Manufacturers Association (387 documents)
example document: American national standard for watthour meters
American National Standards Institute, Inc. (652 documents)
example document: American National Standard generic requirements for light water nuclear power plant fire protection
National Electrical Manufacturers Association (387 documents)
example document: American national standard for watthour meters
American National Standards Institute, Inc. (652 documents)
example document: American National Standard generic requirements for light water nuclear power plant fire protection
American National Standard preferred ratings and related required capabilities for A C high-voltage circuit breakers rated on a symmetrical current basis
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000384983 / 1979-12-11
Date of Publication:
December 4, 1979
Date of Creation:
1979
Title:
American National Standard preferred ratings and related required capabilities for A C high-voltage circuit breakers rated on a symmetrical current basis : [no.] C37.06-1979 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Basis of Claim:
New Matter: additions, revisions & updating.
Previous Registration:
Prev. reg. 1966.
Imprint:
New York : The Institute, c1979.
Description:
32 p.
Variant title:
American National Standard preferred ratings and related required capabilities for A C high-voltage circuit breakers
Other Title:
Preferred ratings and related required capabilities for ac high-voltage circuit breakers ...
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
Institute of Electrical and Electronics Engineers (167 documents)
example document: Communications on the move
National Electrical Manufacturers Association.
American National Standards Institute, Inc. (652 documents)
example document: American national standard practice for storage of processed safety photographic film
example document: Communications on the move
National Electrical Manufacturers Association.
American National Standards Institute, Inc. (652 documents)
example document: American national standard practice for storage of processed safety photographic film
American National Standard for trip devices of ac and general-purpose dc low-voltage power circuit breakers
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000402144 / 1980-01-08
Date of Publication:
December 28, 1979
Date of Creation:
1979
Title:
American National Standard for trip devices of ac and general-purpose dc low-voltage power circuit breakers : A N S I, C37.17-1979 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Basis of Claim:
New Matter: "new, rev., and updated material throughout."
Previous Registration:
Prev. reg. 1970, no. 173676 as American National Standard for trip devices for ac and general-purpose dc low voltage power circuit breakers C37.17-1970.
Imprint:
New York : The Institute, 1979.
Description:
11 p.
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
Institute of Electrical and Electronics Engineers
National Electrical Manufacturers Association (387 documents)
example document: American national standard for electrical metallic tubing--zinc coated (EMT)
American National Standards Institute, Inc. (652 documents)
example document: American national standard for welded aluminum-alloy storage tanks
National Electrical Manufacturers Association (387 documents)
example document: American national standard for electrical metallic tubing--zinc coated (EMT)
American National Standards Institute, Inc. (652 documents)
example document: American national standard for welded aluminum-alloy storage tanks
American national standard for wet-process porcelain insulators (spool type)
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000488507 / 1980-06-02
Date of Publication:
May 22, 1980
Date of Creation:
1980
Title:
American national standard for wet-process porcelain insulators (spool type) : A N S I C29.3-1980 / secretariat, National Electrical Manufacturers Association, Institute of Electrical and Electronics Engineers.
Basis of Claim:
New Matter: "new, rev., and updated material throughout."
Previous Registration:
Prev. reg. 1977, A853903.
Imprint:
New York : American National Standards Institute, c1980.
Description:
11 p.
Other Title:
Wet-process porcelain insulators (spool type)
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
National Electrical Manufacturers Association (387 documents)
example document: American national standard, aluminum rigid conduit (ARC)
Institute of Electrical and Electronics Engineers (167 documents)
example document: Proceedings
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for gaseous radioactive waste processing systems for light water reactor plants
example document: American national standard, aluminum rigid conduit (ARC)
Institute of Electrical and Electronics Engineers (167 documents)
example document: Proceedings
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for gaseous radioactive waste processing systems for light water reactor plants
American national standard for wet-process porcelain insulators (apparatus, cap, and pin type)
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000488508 / 1980-06-02
Date of Publication:
May 22, 1980
Date of Creation:
1980
Title:
American national standard for wet-process porcelain insulators (apparatus, cap, and pin type) : A N S I C29.8-1980 / secretariat, National Electrical Manufacturers Association, Institute of Electrical and Electronics Engineers.
Basis of Claim:
New Matter: "new, rev., and updated material throughout."
Previous Registration:
Prev. reg. 1971, A293432.
Imprint:
New York : American National Standards Institute, c1980.
Description:
24 p.
Other Title:
Wet-process porcelain insulators (apparatus, cap, and pin type)
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
Institute of Electrical and Electronics Engineers
American National Standards Institute, Inc. (652 documents)
example document: American national standard specifications for E J L projection lamp
National Electrical Manufacturers Association (387 documents)
example document: Motors and generators
American National Standards Institute, Inc. (652 documents)
example document: American national standard specifications for E J L projection lamp
National Electrical Manufacturers Association (387 documents)
example document: Motors and generators
Executive summary of the Working Conference on Advanced Electrotechnology Applications to Nuclear Power Plants
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000502209 / 1980-06-30
Date of Publication:
April 28, 1980
Date of Creation:
1980
Title:
Executive summary of the Working Conference on Advanced Electrotechnology Applications to Nuclear Power Plants : January 15-17, 1980, Washington, D. C. / sponsored by the Nuclear Regulatory Commission and The Institute of Electrical and Electronics Engineers, Inc., in cooperation with the following entities of the Institute, United States Activities Board, Technical Activities Board, Aerospace & Electronic Systems Society, ... [et al.].
Imprint:
[s.l. : s.n.], c1980.
Description:
75 p.
Copyright Claimant:
The Institute of Electrical and Electronics Engineers, Inc.
Names:
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: Neural networks for signal processing
Working Conference on Advanced Electrotechnology Applications to Nuclear Power Plants, Washington, D. C., 1980 (1 documents)
example document: Record of the working conference on Advanced Electrotechnology Applications to Nuclear Power Plants
United States. Nuclear Regulatory Commission (4 documents)
example document: Record of the working conference on Advanced Electrotechnology Applications to Nuclear Power Plants
Institute of Electrical and Electronics Engineers. United States Activities Board
Institute of Electrical and Electronics Engineers. Technical Activities Board
Institute of Electrical and Electronics Engineers. Aerospace & Electronic Systems Society
Advanced Electrotechnology Applications to Nuclear Power Plants, Working Conference on.
Nuclear Regulatory Commission. (1 documents)
example document: Record of the working conference on Advanced Electrotechnology Applications to Nuclear Power Plants
example document: Neural networks for signal processing
|
|
Working Conference on Advanced Electrotechnology Applications to Nuclear Power Plants, Washington, D. C., 1980 (1 documents)
example document: Record of the working conference on Advanced Electrotechnology Applications to Nuclear Power Plants
United States. Nuclear Regulatory Commission (4 documents)
example document: Record of the working conference on Advanced Electrotechnology Applications to Nuclear Power Plants
|
|
Institute of Electrical and Electronics Engineers. United States Activities Board
Institute of Electrical and Electronics Engineers. Technical Activities Board
Institute of Electrical and Electronics Engineers. Aerospace & Electronic Systems Society
Advanced Electrotechnology Applications to Nuclear Power Plants, Working Conference on.
Nuclear Regulatory Commission. (1 documents)
example document: Record of the working conference on Advanced Electrotechnology Applications to Nuclear Power Plants
American National Standard preferred ratings, related requirements, and application recommendations for low-voltage circuit breakers and A C power circuit protectors
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000536384 / 1980-08-21
Date of Publication:
August 18, 1980
Date of Creation:
1980
Title:
American National Standard preferred ratings, related requirements, and application recommendations for low-voltage circuit breakers and A C power circuit protectors : A N S I C37.16-1980 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Edition:
Revision of A N S I C37.16-1973.
Basis of Claim:
New Matter: "new, rev. & updated material throughout."
Previous Registration:
Prev. reg. 1973, A475790.
Imprint:
New York : The Institute, c1980.
Description:
27 p.
Variant title:
American National Standard preferred ratings, related requirements, and application recommendations
Other Title:
Preferred ratings, related requirements, and application recommendations for low-voltage circuit breakers ...
Copyright Claimant:
American National Standards Institute, Inc.
Names:
Institute of Electrical and Electronics Engineers
National Electrical Manufacturers Association (387 documents)
example document: Specifications for high-intensity-discharge-lamp ballasts and transformers
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for gaseous radioactive waste processing systems for light water reactor plants
National Electrical Manufacturers Association (387 documents)
example document: Specifications for high-intensity-discharge-lamp ballasts and transformers
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for gaseous radioactive waste processing systems for light water reactor plants
American National Standard requirements for pad-mounted, compartmental-type, self-cooled, single-phase distribution transformers with high-voltage bushings, high-voltage, 34 500 GrdY/19 920 volts and below, low-voltage, 240/120 volts, 167 kVA and smaller
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000536386 / 1980-08-22
Date of Publication:
August 18, 1980
Date of Creation:
1980
Title:
American National Standard requirements for pad-mounted, compartmental-type, self-cooled, single-phase distribution transformers with high-voltage bushings, high-voltage, 34 500 GrdY/19 920 volts and below, low-voltage, 240/120 volts, 167 kVA and smaller : A N S I C57.12.21-1980 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Edition:
Revision of A N S I C57.12.21-1969.
Basis of Claim:
New Matter: "new, rev. & updated material throughout."
Previous Registration:
Prev. reg. 1969.
Imprint:
New York : The Institute, c1980.
Description:
12 p.
Variant title:
American National Standard requirements for pad-mounted, compartmental-type, self-cooled
Other Title:
Requirements for pad-mounted, compartmental-type, self-cooled, single-phase distribution transformers ...
Copyright Claimant:
American National Standards Institute, Inc.
Names:
National Electrical Manufacturers Association (387 documents)
example document: Information guide for general purpose industrial AC small and medium squirrel-cage induction motor standards
Institute of Electrical and Electronics Engineers (167 documents)
example document: Proceedings of the 6th International Conference on the Application of Standards for Open Systems, October 2-4, 1990, Falls Church, Virginia
American National Standards Institute, Inc. (652 documents)
example document: American national standard safety requirements for nail sets
example document: Information guide for general purpose industrial AC small and medium squirrel-cage induction motor standards
Institute of Electrical and Electronics Engineers (167 documents)
example document: Proceedings of the 6th International Conference on the Application of Standards for Open Systems, October 2-4, 1990, Falls Church, Virginia
American National Standards Institute, Inc. (652 documents)
example document: American national standard safety requirements for nail sets
American National Standard requirements for pad-mounted, compartmental-type, self-cooled, three-phase distribution transformers with high-voltage bushings, high-voltage, 34 500 GrdY/19 920 volts and below, 2500 kVa and smaller
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000536387 / 1980-08-21
Date of Publication:
August 18, 1980
Date of Creation:
1980
Title:
American National Standard requirements for pad-mounted, compartmental-type, self-cooled, three-phase distribution transformers with high-voltage bushings, high-voltage, 34 500 GrdY/19 920 volts and below, 2500 kVa and smaller : A N S I C57.12.22-1980 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Edition:
Revision of A N S I C57.12.22-1969.
Basis of Claim:
New Matter: "new, rev. & updated material throughout."
Previous Registration:
Prev. reg. 1969.
Imprint:
New York : The Institute, c1980.
Description:
20 p.
Variant title:
American National Standard requirements for pad-mounted, compartmental-type, self-cooled
Other Title:
Requirements for pad-mounted, compartmental-type, self-cooled, three-phase distribution transformers ...
Copyright Claimant:
American National Standards Institute, Inc.
Names:
National Electrical Manufacturers Association (387 documents)
example document: American national standard for electric lamps, pulse start metal-halide lamps 175-watt, M152, 250-watt, M153, 320-watt, M154, 400-watt, M155
Institute of Electrical and Electronics Engineers (167 documents)
example document: Remote sensing science for the nineties
American National Standards Institute, Inc. (652 documents)
example document: ASME boiler and pressure vessel code
example document: American national standard for electric lamps, pulse start metal-halide lamps 175-watt, M152, 250-watt, M153, 320-watt, M154, 400-watt, M155
Institute of Electrical and Electronics Engineers (167 documents)
example document: Remote sensing science for the nineties
American National Standards Institute, Inc. (652 documents)
example document: ASME boiler and pressure vessel code
American National Standard specifications for distribution oil cutouts and fuse links
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000659113 / 1981-03-18
Date of Publication:
March 16, 1981
Date of Creation:
1981
Title:
American National Standard specifications for distribution oil cutouts and fuse links : A N S I C37.44-1981 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Edition:
Revision of A N S I C37.44-1969.
Basis of Claim:
New Matter: "new, rev. & updated material throughout."
Previous Registration:
Prev. reg. 1969, no. 173674.
Other Title:
Specifications for distribution oil cutouts and fuse links
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
Institute of Electrical and Electronics Engineers (167 documents)
example document: 1991 IEEE Computer Society Symposium on Research in Security and Privacy, May 20-22, 1991, Oakland, California
National Electrical Manufacturers Association (387 documents)
example document: American national standard for electric lamps--CBA projection lamp
American National Standards Institute, Inc. (652 documents)
example document: American National Standard unrecorded eleven-disk pack--general, physical, and magnetic requirements
example document: 1991 IEEE Computer Society Symposium on Research in Security and Privacy, May 20-22, 1991, Oakland, California
National Electrical Manufacturers Association (387 documents)
example document: American national standard for electric lamps--CBA projection lamp
American National Standards Institute, Inc. (652 documents)
example document: American National Standard unrecorded eleven-disk pack--general, physical, and magnetic requirements
American National Standard specifications for distribution fuse disconnecting switches, fuse supports, and current-limiting fuses
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000659114 / 1981-03-18
Date of Publication:
March 16, 1981
Date of Creation:
1981
Title:
American National Standard specifications for distribution fuse disconnecting switches, fuse supports, and current-limiting fuses : A N S I C37.47-1981 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Edition:
Revision of A N S I C37.47-1969.
Basis of Claim:
New Matter: "new, rev. & updated material throughout."
Previous Registration:
Prev. reg. 1969, no. 172984.
Variant title:
American National Standard specifications for distribution fuse disconnecting switches, fuse supports
Other Title:
Specifications for distribution fuse disconnecting switches, fuse supports, and current-limiting fuses
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
Institute of Electrical and Electronics Engineers (167 documents)
example document: American national standard conformance requirements for liquid-filled transformers used in unit installations, including unit substations
National Electrical Manufacturers Association (387 documents)
example document: Digital imaging and communications in medicine (DICOM)
American National Standards Institute, Inc. (652 documents)
example document: American national standard data encryption algorithm
example document: American national standard conformance requirements for liquid-filled transformers used in unit installations, including unit substations
National Electrical Manufacturers Association (387 documents)
example document: Digital imaging and communications in medicine (DICOM)
American National Standards Institute, Inc. (652 documents)
example document: American national standard data encryption algorithm
American National Standard specifications for power fuses and fuse disconnecting switches
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000659115 / 1981-03-18
Date of Publication:
March 16, 1981
Date of Creation:
1981
Title:
American National Standard specifications for power fuses and fuse disconnecting switches : A N S I C37.46-1981 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Edition:
Revision of A N S I C37.46-1969.
Basis of Claim:
New Matter: "new, rev. & updated material throughout."
Previous Registration:
Prev. reg. 1969, no. 173672.
Other Title:
Specifications for power fuses and fuse disconnecting switches
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
National Electrical Manufacturers Association (387 documents)
example document: Performance measurements of scintillation cameras
American National Standards Institute, Inc. (652 documents)
example document: American National Standard metric heavy hex screws
Institute of Electrical and Electronics Engineers
example document: Performance measurements of scintillation cameras
American National Standards Institute, Inc. (652 documents)
example document: American National Standard metric heavy hex screws
Institute of Electrical and Electronics Engineers
American National Standard specifications for distribution cutouts and fuse links
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000659116 / 1981-03-24
Date of Publication:
March 20, 1981
Date of Creation:
1981
Title:
American National Standard specifications for distribution cutouts and fuse links : A N S I C37.42-1981 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Edition:
Revision of A N S I C37.42-1969.
Basis of Claim:
New Matter: "new, rev. & updated material throughout."
Previous Registration:
Prev. reg. 1969, no. 179586.
Other Title:
Specifications for distribution cutouts and fuse links
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
National Electrical Manufacturers Association (387 documents)
example document: Construction of steel fluted returnable reels for wires and cables
American National Standards Institute, Inc. (652 documents)
example document: American National Standard method for measuring temperature of photographic equipment
Institute of Electrical and Electronics Engineers (167 documents)
example document: Cities and regions as nonlinear decision systems
example document: Construction of steel fluted returnable reels for wires and cables
American National Standards Institute, Inc. (652 documents)
example document: American National Standard method for measuring temperature of photographic equipment
Institute of Electrical and Electronics Engineers (167 documents)
example document: Cities and regions as nonlinear decision systems
American National Standard specifications for distribution enclosed single-pole air switches
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000659118 / 1981-03-18
Date of Publication:
March 16, 1981
Date of Creation:
1981
Title:
American National Standard specifications for distribution enclosed single-pole air switches : A N S I C37.45-1981 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Edition:
Revision of A N S I C37.45-1969.
Basis of Claim:
New Matter: "new, rev., and updated material throughout."
Previous Registration:
Prev. reg. 1969, no. 173673.
Other Title:
Specifications for distribution enclosed single-pole air switches
Copyright Claimant:
American National Standards Institute, Inc.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
Institute of Electrical and Electronics Engineers (167 documents)
example document: Proceedings of the 1990 IEEE Workshop on Visual Languages, October 4-6, 1990, Skokie, Illinois, USA
National Electrical Manufacturers Association (387 documents)
example document: Digital imaging and communications in medicine (DICOM)
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for emergency control centers for nuclear power plants
example document: Proceedings of the 1990 IEEE Workshop on Visual Languages, October 4-6, 1990, Skokie, Illinois, USA
National Electrical Manufacturers Association (387 documents)
example document: Digital imaging and communications in medicine (DICOM)
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for emergency control centers for nuclear power plants
Requirements for sealed, dry-type power transformers, 501 kVA and larger, three-phase, with high-voltage 601 to 34 500 volts, low-voltage 208Y/120 to 4160 volts
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000729214 / 1981-07-13
Date of Publication:
June 30, 1981
Date of Creation:
1981
Title:
Requirements for sealed, dry-type power transformers, 501 kVA and larger, three-phase, with high-voltage 601 to 34 500 volts, low-voltage 208Y/120 to 4160 volts : A N S I C57.12.52-1981 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Variant title:
Requirements for sealed, dry-type power transformers, 501 kVA and larger, three-phase, with high-voltage
Copyright Claimant:
American National Standards Institute, Inc.
Notes:
American national standard.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
Institute of Electrical and Electronics Engineers (167 documents)
example document: Design of cardiac pacemakers
National Electrical Manufacturers Association (387 documents)
example document: American national standard specifications for 400-watt M59 metal-halide lamp
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for solid radioactive waste processing system for light water cooled reactor plants
example document: Design of cardiac pacemakers
National Electrical Manufacturers Association (387 documents)
example document: American national standard specifications for 400-watt M59 metal-halide lamp
American National Standards Institute, Inc. (652 documents)
example document: American National Standard for solid radioactive waste processing system for light water cooled reactor plants
Requirements for ventilated, dry-type power transformers, 501 kVA and larger, three-phase, with high-voltage 601 to 34 500 volts, low-voltage 208Y/120 to 4160 volts
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000729215 / 1981-07-13
Date of Publication:
June 30, 1981
Date of Creation:
1981
Title:
Requirements for ventilated, dry-type power transformers, 501 kVA and larger, three-phase, with high-voltage 601 to 34 500 volts, low-voltage 208Y/120 to 4160 volts : A N S I C57.12.51-1981 / secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Variant title:
Requirements for ventilated, dry-type power transformers, 501 kVA and larger, three-phase, with high-voltage
Copyright Claimant:
American National Standards Institute, Inc.
Notes:
American national standard.
Authorship on Application:
American National Standards Institute, Inc., employer for hire.
Names:
Institute of Electrical and Electronics Engineers (167 documents)
example document: Twenty-eighth IEEE/CPMT international electronics manufacturing technology symposium
National Electrical Manufacturers Association (387 documents)
example document: American national standard for electric lamps--P28 single-contact medium prefocus based projection lamps for base-down operation--dimensions
American National Standards Institute, Inc. (652 documents)
example document: American National Standard metric hex bolts
example document: Twenty-eighth IEEE/CPMT international electronics manufacturing technology symposium
National Electrical Manufacturers Association (387 documents)
example document: American national standard for electric lamps--P28 single-contact medium prefocus based projection lamps for base-down operation--dimensions
American National Standards Institute, Inc. (652 documents)
example document: American National Standard metric hex bolts
IEEE standard enclosed field discharge circuit breakers for rotating electric machinery
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000797245 / 1981-10-26
Date of Publication:
June 30, 1980
Date of Creation:
1980
Title:
IEEE standard enclosed field discharge circuit breakers for rotating electric machinery : A N S I/I E E E C37.18-1979 / sponsor, Switchgear Committee of the I E E E Power Engineering Society ; secretariat, Institute of Electrical and Electronics Engineers, National Electrical Manufacturers Association.
Other Title:
American national standard enclosed field discharge circuit breakers for rotating electric machinery
Copyright Claimant:
The Institute of Electrical and Electronics Engineers, Inc.
Notes:
Cover ti.: American national standard enclosed field discharge circuit breakers for rotating electric machinery.
Authorship on Application:
collective work: Institute of Elect[r]ical and Electronics Engineers, Inc., employer for hire.
Names:
National Electrical Manufacturers Association (387 documents)
example document: Construction of steel fluted returnable reels for wires and cables
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: The Second International Workshop on Rapid System Prototyping
Institute of Electrical and Electronics Engineers, Inc. Power Engineering Society. Switchgear Committee (5 documents)
example document: Supplement to IEEE standard definitions for power switchgear
Switchgear Committee of the I E E E Power Engineering Society. (2 documents)
example document: IEEE standard rating structure for A C high-voltage circuit breakers rated on a symmetrical current basis
example document: Construction of steel fluted returnable reels for wires and cables
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: The Second International Workshop on Rapid System Prototyping
Institute of Electrical and Electronics Engineers, Inc. Power Engineering Society. Switchgear Committee (5 documents)
example document: Supplement to IEEE standard definitions for power switchgear
|
|
Switchgear Committee of the I E E E Power Engineering Society. (2 documents)
example document: IEEE standard rating structure for A C high-voltage circuit breakers rated on a symmetrical current basis
American national standard requirements for cylindrical-rotor synchronous generators
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000853156 / 1982-02-01
Date of Publication:
June 17, 1977
Date of Creation:
1977
Title:
American national standard requirements for cylindrical-rotor synchronous generators : A N S I C50.13-1977 / secretariat, Edison Electric Institute, Institute of Electrical and Electronics Engineers, Inc., National Electrical Manufacturers Association.
Application Title:
Requirements for cylindrical-rotor synchronous generators.
Edition:
Revision of C50.13-1965.
Other Title:
Requirements for cylindrical-rotor synchronous generators
Copyright Claimant:
I E E E Standards Office
Authorship on Application:
collective work: Institute of Electrical and Electronics Engineers, Inc., employer for hire.
Names:
Edison Electric Institute
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: 1980 I E E E M T T-S International Microwave Symposium digest
National Electrical Manufacturers Association (387 documents)
example document: Construction of steel fluted returnable reels for wires and cables
Institute of Electrical and Electronics Engineers, Inc. Standards Office
IEEE Standards Office.
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: 1980 I E E E M T T-S International Microwave Symposium digest
National Electrical Manufacturers Association (387 documents)
example document: Construction of steel fluted returnable reels for wires and cables
Institute of Electrical and Electronics Engineers, Inc. Standards Office
IEEE Standards Office.
American national standard requirements for combustion gas turbine driven cylindrical rotor synchronous generators
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000853157 / 1982-02-01
Date of Publication:
June 10, 1977
Date of Creation:
1977
Title:
American national standard requirements for combustion gas turbine driven cylindrical rotor synchronous generators : A N S I C50.14-1977 / secretariat, Edison Electric Institute, Institute of Electrical and Electronics Engineers, Inc., National Electrical Manufacturers Association.
Application Title:
Requirements for combustion gas turbine driven cylindrical rotor synchronous generators.
Other Title:
Requirements for combustion gas turbine driven cylindrical rotor synchronous generators
Copyright Claimant:
I E E E Standards Office
Authorship on Application:
collective work: Institute of Electrical and Electronics Engineers, Inc., employer for hire.
Names:
Edison Electric Institute
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: The Ninth International Symposium on Multiple-Valued Logic
National Electrical Manufacturers Association (387 documents)
example document: American national standard for gas tube surge arresters on wire line telephone circuits
Institute of Electrical and Electronics Engineers, Inc. Standards Office
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: The Ninth International Symposium on Multiple-Valued Logic
National Electrical Manufacturers Association (387 documents)
example document: American national standard for gas tube surge arresters on wire line telephone circuits
Institute of Electrical and Electronics Engineers, Inc. Standards Office
American national standard general requirements for synchronous machines
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000853159 / 1982-02-01
Date of Publication:
June 17, 1977
Date of Creation:
1977
Title:
American national standard general requirements for synchronous machines : A N S I C50.10-1977 / secretariat, Edison Electric Institute, Institute of Electrical and Electronics Engineers, Inc., National Electrical Manufacturers Association.
Application Title:
General requirements for synchronous machines.
Other Title:
General requirements for synchronous machines
Copyright Claimant:
Institute of Electrical and Electronics Engineers, Inc.
Authorship on Application:
collective work: Institute of Electrical and Electronics Engineers, Inc., employer for hire.
Names:
Edison Electric Institute
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: Nearest neighbor (NN) norms
National Electrical Manufacturers Association (387 documents)
example document: Nomenclature for glass bulbs intended for use with electric lamps
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: Nearest neighbor (NN) norms
National Electrical Manufacturers Association (387 documents)
example document: Nomenclature for glass bulbs intended for use with electric lamps
IEEE standard terminology for power and distribution transformers
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0000873250 / 1981-12-11
Date of Publication:
February 17, 1978
Date of Creation:
1978
Title:
IEEE standard terminology for power and distribution transformers : A N S I/I E E E C57.12.80-1978 / sponsor, Transformers Committee of the I E E E Power Engineering Society ; secretariat, National Electrical Manufacturers Association, Edison Electric Institute, Institute of Electrical and Electronics Engineers.
Edition:
Revision of C57.12.80-1958.
Basis of Claim:
New Matter: "additional text and editorial revisions."
Previous Registration:
Prev. reg.
Copyright Note:
C.O. correspondence.
Description:
31 p.
Other Title:
Terminology for power and distribution transformers
Copyright Claimant:
Institute of Electrical and Electronics Engineers, Inc.
Notes:
Cover ti.: Terminology for power and distribution transformers.
An American national standard.
An American national standard.
Authorship on Application:
Institute of Electrical and Electronics Engineers, Inc., employer for hire.
Names:
National Electrical Manufacturers Association (387 documents)
example document: American national standard for zinc-coated ferrous eyenuts and eyebolts for overhead line construction
Edison Electric Institute (59 documents)
example document: The Vital link
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: Computer methods in image analysis
Institute of Electrical and Electronics Engineers, Inc. Power Engineering Society. Transformers Committee (2 documents)
example document: IEEE guide for loading mineral-oil-immersed overhead and pad-mounted distribution transformers
Transformers Committee of the I E E E Power Engineering Society. (1 documents)
example document: IEEE guide for loading mineral-oil-immersed overhead and pad-mounted distribution transformers
example document: American national standard for zinc-coated ferrous eyenuts and eyebolts for overhead line construction
Edison Electric Institute (59 documents)
example document: The Vital link
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: Computer methods in image analysis
Institute of Electrical and Electronics Engineers, Inc. Power Engineering Society. Transformers Committee (2 documents)
example document: IEEE guide for loading mineral-oil-immersed overhead and pad-mounted distribution transformers
Transformers Committee of the I E E E Power Engineering Society. (1 documents)
example document: IEEE guide for loading mineral-oil-immersed overhead and pad-mounted distribution transformers
Autotestcon '89 conference record, I E E E International Automatic Testing Conference, Adams Mark Hotel, Philadelphia, September 25-28, 1989
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002686151 / 1989-10-24
Date of Publication:
September 25, 1989
Date of Creation:
1989
Title:
Autotestcon '89 conference record, I E E E International Automatic Testing Conference, Adams Mark Hotel, Philadelphia, September 25-28, 1989 / sponsored by the Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Society, Aerospace and Electronic Systems Society, I E E E Philadelphia Section.
Description:
357 p.
Variant title:
Autotestcon '89 conference record, I E E E International Automatic Testing Conference
Copyright Claimant:
the Institute of Electrical and Electronics Engineers, Inc.
Names:
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: Microprocessors & microcomputers
Institute of Electrical and Electronics Engineers. Instrumentation and Measurement Society
Institute of Electrical and Electronics Engineers. Aerospace and Electronic Systems Society
Institute of Electrical and Electronics Engineers. Philadelphia Section (3 documents)
example document: Sensor fusion II
IEEE International Automatic Testing Conference, Philadelphia, 1989
Instrumentation and Measurement Society.
Aerospace and Electronic Systems Society.
IEEE Philadelphia Section. (3 documents)
example document: 1992 IEEE VLSI Test Symposium
Autotestcon '89.
example document: Microprocessors & microcomputers
Institute of Electrical and Electronics Engineers. Instrumentation and Measurement Society
Institute of Electrical and Electronics Engineers. Aerospace and Electronic Systems Society
Institute of Electrical and Electronics Engineers. Philadelphia Section (3 documents)
example document: Sensor fusion II
IEEE International Automatic Testing Conference, Philadelphia, 1989
Instrumentation and Measurement Society.
Aerospace and Electronic Systems Society.
|
|
IEEE Philadelphia Section. (3 documents)
example document: 1992 IEEE VLSI Test Symposium
|
|
Autotestcon '89.
Proceedings--third annual IEEE Symposium on Computer-Based Medical Systems
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002867334 / 1990-07-26
Date of Publication:
May 30, 1990
Date of Creation:
1990
Title:
Proceedings--third annual IEEE Symposium on Computer-Based Medical Systems : June 3-6, 1990, University of North Carolina at Chapel Hill / sponsored by IEEE Computer Society, IEEE Engineering in Medicine and Biology Society, IEEE Eastern North Carolina Section.
Description:
1 v.
Copyright Claimant:
the Institute of Electrical and Electronics Engineers
Authorship on Application:
the Institute of Electrical and Electronics Engineers, Inc., employer for hire.
Names:
IEEE Symposium on Computer-Based Medical Systems, 3rd, University of North Carolina at Chapel Hill, 1990
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: Computational electromagnetics
Institute of Electrical and Electronics Engineers. Computer Society (16 documents)
example document: Optical and digital pattern recognition
Institute of Electrical and Electronics Engineers. Engineering in Medicine and Biology Society
Institute of Electrical and Electronics Engineers. Eastern North Carolina Section
IEEE Engineering in Medicine and Biology Society.
IEEE Eastern North Carolina Section.
IEEE Computer Society. (49 documents)
example document: The Second Conference on Artificial Intelligence Applications--the Engineering of Knowledge-based Systems
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: Computational electromagnetics
Institute of Electrical and Electronics Engineers. Computer Society (16 documents)
example document: Optical and digital pattern recognition
|
|
Institute of Electrical and Electronics Engineers. Engineering in Medicine and Biology Society
Institute of Electrical and Electronics Engineers. Eastern North Carolina Section
IEEE Engineering in Medicine and Biology Society.
|
|
IEEE Eastern North Carolina Section.
IEEE Computer Society. (49 documents)
example document: The Second Conference on Artificial Intelligence Applications--the Engineering of Knowledge-based Systems
|
|
Proceedings of the 1990 IEEE International Conference on Computer Systems and Software Engineering
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002880951 / 1990-07-11
Date of Publication:
April 20, 1990
Date of Creation:
1990
Title:
Proceedings of the 1990 IEEE International Conference on Computer Systems and Software Engineering : May 8-10, 1990, Tel-Aviv, Israel / sponsors, Institute of Electrical and Electronics Engineering, Region 8 and Israel Section, the Computer Society of IEEE, Information Processing Association of Israel.
Copyright Claimant:
the Institute of Electrical and Electronics Engineers
Authorship on Application:
collective work: the Institute of Electrical and Electronics Engineers, Inc., employer for hire.
Names:
IEEE International Conference on Computer Systems and Software Engineering, Tel-Aviv, 1990
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: IEEE VLSI Test Symposium, 1991
Institute of Electrical and Electronics Engineering. Region 8
Institute of Electrical and Electronics Engineering. Israel Section
Institute of Electrical and Electronics Engineering. Computer Society
Information Processing Association of Israel
COMPEURO'90.
Computer Society of IEEE.
Computer Systems and Software Engineering, IEEE International Conference on.
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: IEEE VLSI Test Symposium, 1991
Institute of Electrical and Electronics Engineering. Region 8
Institute of Electrical and Electronics Engineering. Israel Section
Institute of Electrical and Electronics Engineering. Computer Society
Information Processing Association of Israel
|
|
COMPEURO'90.
Computer Society of IEEE.
Computer Systems and Software Engineering, IEEE International Conference on.
Proceedings of 1994 IEEE Southeastcon '94
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0003896543 / 1994-09-28
Date of Publication:
April 10, 1994
Date of Creation:
1994
Title:
Proceedings of 1994 IEEE Southeastcon '94 / hosted by Florida International University, ECE Department, University of Miami, ECE Department, IEEE Miami Section, IEEE Region 3, IEEE Florida Council.
Description:
492 p.
Copyright Claimant:
the Institute of Electrical and Electronics Engineers, Inc. (employer for hire)
Notes:
Held in Miami, Apr. 10-13, 1994.
Names:
Institute of Electrical and Electronics Engineers, Inc. (1741 documents)
example document: Field theory of guided waves
Florida International University. ECE Department
University of Miami. ECE Department
Institute of Electrical and Electronics Engineers. Miami Section
Institute of Electrical and Electronics Engineers. Region 3
Institute of Electrical and Electronics Engineers. Florida Council
Southeastcon '94, Miami, 1994
example document: Field theory of guided waves
Florida International University. ECE Department
University of Miami. ECE Department
Institute of Electrical and Electronics Engineers. Miami Section
Institute of Electrical and Electronics Engineers. Region 3
Institute of Electrical and Electronics Engineers. Florida Council
Southeastcon '94, Miami, 1994
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible. Multiple persons can share the same name.