Computer integrated manufacturing systems--theory and application
Computer integrated manufacturing systems--theory and application
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000326849 / 1987-01-09
Date of Publication:
November 15, 1986
Date of Creation:
1986
Title:
Computer integrated manufacturing systems--theory and application.
Copyright Note:
C.O. correspondence.
Imprint:
New York : American Society of Mechanical Engineers, c1986.
Description:
3 videocassettes (VHS) : sd., col. ; 1/2 in.
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
American Society of Mechanical Engineers (2878 documents)
example document: Reliability, stress analysis, and failure prevention methods in mechanical design
example document: Reliability, stress analysis, and failure prevention methods in mechanical design
|
Computer integrated manufacturing
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000691493 / 1994-05-26
Date of Publication:
April 1, 1994
Date of Creation:
1994
Title:
Computer integrated manufacturing.
Description:
Videocassette ; 1/2 in.
Copyright Claimant:
Meridian Education Corporation
Names:
Meridian Education Corporation (182 documents)
example document: Communication with pre-school children
example document: Communication with pre-school children
|
Computer integrated manufacturing systems
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0001712223 / 1985-10-18
Date of Publication:
February 6, 1985
Date of Creation:
1985
Title:
Computer integrated manufacturing systems : selected readings / edited by John W. Nazemetz, William E. Hammer, Jr., and Randall P. Sadowski.
Basis of Claim:
New Matter: pref. & introd.
Previous Registration:
All articles were prev. pub. in Industrial engineering magazine or in the conference proceedings of the Institute of Industrial Engineers.
Copyright Note:
C.O. correspondence.
Description:
303 p.
Variant title:
Computer integrated manufacturing systems : selected readings
Other Title:
Industrial engineering magazine
Copyright Claimant:
Institute of Industrial Engineers
Authorship on Application:
collection: Institute of Industrial Engineers, employer for hire.
Names:
John W. Nazemetz (2 documents)
example document: Introduction to industrial and systems engineering
Hammer, William E., Jr. (1 documents)
example document: An Engineer's guide to spreadsheets, word processors & data base managers
Randall P. Sadowski
Institute of Industrial Engineers (39 documents)
example document: Productivity and quality improvement in government
example document: Introduction to industrial and systems engineering
Hammer, William E., Jr. (1 documents)
example document: An Engineer's guide to spreadsheets, word processors & data base managers
Randall P. Sadowski
Institute of Industrial Engineers (39 documents)
example document: Productivity and quality improvement in government
|
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0001810878 / 1986-05-06
Date of Publication:
January 2, 1986
Date of Creation:
1985
Title:
Computer integrated manufacturing : an introduction with case studies / Paul G. Ranky.
Previous Registration:
Place of first publication stated on appl.: England.
Imprint:
Englewood Cliffs, NJ : Prentice/Hall, c1986.
Description:
513 p.
Copyright Claimant:
Prentice-Hall International (U K), Ltd.
Names:
Paul G. Ranky 1951-
Prentice-Hall International (U K), Ltd. (10 documents)
example document: Specification case studies
Prentice-Hall International (U K), Ltd. (10 documents)
example document: Specification case studies
|
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002134532 / 1987-06-26
Date of Publication:
May 8, 1987
Date of Creation:
1986
Title:
Computer integrated manufacturing : a systems approach / Christopher LeMaistre, Ahmed el-Sawy.
Copyright Note:
C.O. correspondence.
Imprint:
White Plains, N. Y. : UNIPUB/Kraus International Publications, c1987.
Description:
151 p.
Copyright Claimant:
UNIPUB/Kraus International Publications
Names:
Christopher LeMaistre
Ahmed el Sawy
UNIPUB/Kraus International Publications (1 documents)
example document: System of experimental design
Ahmed el Sawy
UNIPUB/Kraus International Publications (1 documents)
example document: System of experimental design
Computer integrated manufacturing project management plan
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002249133 / 1988-01-07
Date of Publication:
January 1, 1988
Date of Creation:
1988
Title:
Computer integrated manufacturing project management plan.
Description:
1 p.
Copyright Claimant:
Anthony Glen Moya
Authorship on Application:
entire text: A. G. M. Associates & Anthony Glen Moya, whose pseud. is A. G. M. Associates.
Names:
Anthony Glen Moya
A.G.M. Associates
A.G.M. Associates
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002274801 / 1988-03-11
Date of Publication:
February 28, 1988
Date of Creation:
1987
Title:
Computer integrated manufacturing / Peter S. Vail.
Series:
The PWS-Kent series in technology
Imprint:
Boston : PWS-Kent Pub. Co., c1988.
Description:
291 p.
Copyright Claimant:
P W S-Kent Publishing Company
Names:
Peter S. Vail
PWS-Kent Publishing Company (158 documents)
example document: HOW5:a handbook for office workers
PWS-Kent Publishing Company (158 documents)
example document: HOW5:a handbook for office workers
|
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002334501 / 1988-06-01
Date of Publication:
March 15, 1988
Date of Creation:
1987
Title:
Computer integrated manufacturing : communication/standardization/interfaces : proceedings of the Technology Assessment and Management Conference of the Gottlieb Duttweiler Institute, Rueschlikon, Zuerich, Switzerland, 24-25 November, 1987 / edited by Thomas Bernold and Walter Guttropf.
Series:
Technology assessment and management ; 4
Imprint:
New York : North-Holland, 1988.
Description:
213 p.
Other Title:
Technology assessment and management ; 4
Copyright Claimant:
Elsevier Scientific Publishing Company
Copyright Notice:
notice: G D I (Gottlieb Duttweiler Institute)
Names:
Thomas Bernold (3 documents)
example document: Computer assisted approaches to training
Walter Guttropf
Elsevier Scientific Publishing Company (226 documents)
example document: Reservations and interpretive declarations to multilateral treaties
Gottlieb Duttweiler Institute (3 documents)
example document: Expert systems in production and services
Technology Assessment and Management Conference, Rueschlikon, Zuerich, 1986
example document: Computer assisted approaches to training
|
Walter Guttropf
Elsevier Scientific Publishing Company (226 documents)
example document: Reservations and interpretive declarations to multilateral treaties
|
Gottlieb Duttweiler Institute (3 documents)
example document: Expert systems in production and services
Technology Assessment and Management Conference, Rueschlikon, Zuerich, 1986
Computer integrated manufacturing :SP-663
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002372202 / 1988-07-20
Date of Publication:
April 1, 1986
Date of Creation:
1986
Title:
Computer integrated manufacturing :SP-663.
Imprint:
Warrendale, PA : Society of Automotive Engineers, 1986.
Description:
41 p.
Copyright Claimant:
Society of Automotive Engineers, Inc.
Names:
Society of Automotive Engineers, Inc. (163 documents)
example document: Proceedings of the 1997 total life cycle conference
example document: Proceedings of the 1997 total life cycle conference
|
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002372258 / 1988-08-10
Date of Publication:
April 15, 1988
Date of Creation:
1988
Title:
Computer integrated manufacturing.
Imprint:
folder.
Copyright Claimant:
Peat Marwick
Copyright Notice:
notice: Peat Marwick Main & Company
Names:
Peat Marwick Main & Company (9 documents)
example document: Government contractor practice
example document: Government contractor practice
|
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002461654 / 1988-09-20
Date of Publication:
September 1, 1988
Date of Creation:
1988
Title:
Computer integrated manufacturing : software and student manual / by Richard A. Wysk, Tien-chien Chang, Hsu-pin Wang.
Copyright Note:
C.O. correspondence.
Description:
1 v.
Copyright Claimant:
Delmar Publishers, Inc.
Names:
Richard A. Wysk (4 documents)
example document: Modern manufacturing process engineering
Tien-chien Chang 1954-
Hsu-pin Wang 1954-
Delmar Publishers, Inc. (975 documents)
example document: Electrical wiring--commercial
example document: Modern manufacturing process engineering
|
Tien-chien Chang 1954-
Hsu-pin Wang 1954-
Delmar Publishers, Inc. (975 documents)
example document: Electrical wiring--commercial
|
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002547290 / 1989-04-26
Date of Publication:
April 12, 1989
Date of Creation:
1988
Date in Notice:
notice: 1988
Title:
Computer integrated manufacturing : instructor's guide / Richard A. Wysk, Tien-chien Chang, Hsu-pin Wang.
Imprint:
Albany : Delmar Publishers, c1988.
Description:
120 p.
Copyright Claimant:
Delmar Publishers, Inc.
Names:
Richard A. Wysk (4 documents)
example document: Improving production with lean thinking
Tien-chien Chang 1954-
Hsu-pin Wang 1954-
Ben Wang
Delmar Publishers, Inc. (975 documents)
example document: Graphic communication technology
example document: Improving production with lean thinking
Tien-chien Chang 1954-
Hsu-pin Wang 1954-
Ben Wang
Delmar Publishers, Inc. (975 documents)
example document: Graphic communication technology
Computer integrated manufacturing software & student manual
Type of Work:
Machine-readable work or computer program
Registration Number / Date:
TX0002584237 / 1988-09-26
Date of Publication:
September 2, 1988
Date of Creation:
1988
Title:
Computer integrated manufacturing software & student manual / Richard A. Wysk, Tien-chien Chang, Hsu-pin Wang.
Basis of Claim:
New Matter: "new and revised program text."
Previous Registration:
Prev. reg.
Copyright Note:
C.O. correspondence.
Imprint:
Albany : Delmar, c1988.
Description:
1 v. + printout.
Copyright Claimant:
Delmar Publishers, Inc.
Names:
Richard A. Wysk (4 documents)
example document: Improving production with lean thinking
Tien-chien Chang 1954-
Hsu-pin Wang 1954-
Delmar Publishers, Inc. (975 documents)
example document: Motor auto body repair, 2nd edition
example document: Improving production with lean thinking
Tien-chien Chang 1954-
Hsu-pin Wang 1954-
Delmar Publishers, Inc. (975 documents)
example document: Motor auto body repair, 2nd edition
Computer integrated manufacturing communication and data facility
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002685289 / 1989-11-06
Date of Publication:
October 19, 1989
Date of Creation:
1989
Title:
Computer integrated manufacturing communication and data facility : planning guide.
Application Title:
CIM communication and data facility: planning guide.
Edition:
1st ed.
Description:
1 v.
Other Title:
C I M communication and data facility
Copyright Claimant:
International Business Machines Corporation, a.a.d.: I B M Corporation
Names:
International Business Machines Corporation (34378 documents)
example document: Change management/tracking (CM/T), DP accounting for IMS/VS (DPA), service level reporter (SLR)
example document: Change management/tracking (CM/T), DP accounting for IMS/VS (DPA), service level reporter (SLR)
|
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002786287 / 1990-03-26
Date of Publication:
March 16, 1990
Date of Creation:
1989
Title:
Computer integrated manufacturing : a source book / prepared by Steven A. Melnyk, Ram Narasimhan.
Description:
1 v.
Variant title:
Computer integrated manufacturing : a source book
Copyright Claimant:
APICS
Authorship on Application:
American Production and Inventory Control Society, employer for hire.
Names:
Steven A. Melnyk (6 documents)
example document: Shop floor control
Ram Narasimhan (2 documents)
example document: Purchasing and materials management's role in total quality management and customer satisfaction
American Production and Inventory Control Society (10 documents)
example document: APICS bibliography
APICS. (8 documents)
example document: Production and inventory control handbook
example document: Shop floor control
|
Ram Narasimhan (2 documents)
example document: Purchasing and materials management's role in total quality management and customer satisfaction
American Production and Inventory Control Society (10 documents)
example document: APICS bibliography
|
APICS. (8 documents)
example document: Production and inventory control handbook
|
Computer integrated manufacturing communication and data facility
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002790670 / 1990-04-04
Date of Publication:
March 23, 1990
Date of Creation:
1990
Title:
Computer integrated manufacturing communication and data facility : planning guide.
Application Title:
IBM CIM communication and data facility: plannning guide.
Edition:
2nd ed.
Basis of Claim:
New Matter: "new & revised text."
Previous Registration:
Prev. reg. 1989, TX 2-685-289.
Other Title:
CIM communication and data facility
IBM CIM communication and data facility
IBM CIM communication and data facility
Copyright Claimant:
International Business Machines Corporation, a.a.d.: IBM Corporation
Notes:
Cover ti.: CIM communication and data facility: planning guide.
Names:
International Business Machines Corporation (34378 documents)
example document: Operations planning and control general information manual
example document: Operations planning and control general information manual
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002847300 / 1990-05-24
Date of Publication:
April 6, 1990
Date of Creation:
1990
Title:
Computer integrated manufacturing : theory and practice / Daniel T. Koenig.
Copyright Note:
C.O. correspondence.
Description:
1 v.
Copyright Claimant:
Hemisphere Publishing Corporation
Authorship on Application:
Hemisphere Publishing Corporation, employer for hire.
Names:
Daniel T. Koenig (2 documents)
example document: The engineer entrepreneur
Hemisphere Publishing Corporation (284 documents)
example document: Measurement techniques in power engineering
example document: The engineer entrepreneur
Hemisphere Publishing Corporation (284 documents)
example document: Measurement techniques in power engineering
|
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0003243048 / 1992-02-10
Date of Publication:
December 5, 1991
Date of Creation:
1991
Title:
Computer integrated manufacturing : guidelines and applications from industrial leaders / Steven A. Melnyk, Ram Narasimhan.
Description:
378 p.
Copyright Claimant:
Richard D. Irwin, Inc.
Names:
Steven A. Melnyk
Ram Narasimhan (2 documents)
example document: Purchasing and materials management's role in total quality management and customer satisfaction
Richard D. Irwin, Inc. (2789 documents)
example document: Personnel/human resource management
Ram Narasimhan (2 documents)
example document: Purchasing and materials management's role in total quality management and customer satisfaction
Richard D. Irwin, Inc. (2789 documents)
example document: Personnel/human resource management
|
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0003473040 / 1993-01-11
Date of Publication:
December 23, 1992
Date of Creation:
1992
Title:
Computer integrated manufacturing : 1131.
Description:
36 p.
Variant title:
Computer integrated manufacturing : 1131
Copyright Claimant:
McGraw-Hill Continuing Education Center (a.k.a. NRI)
Names:
McGraw-Hill Continuing Education Center (32 documents)
example document: Defining the problem
NRI (23 documents)
example document: Landscaping
McGraw-Hill Continuing Education Center. National Radio Institute (251 documents)
example document: Introduction to computers
example document: Defining the problem
|
NRI (23 documents)
example document: Landscaping
|
McGraw-Hill Continuing Education Center. National Radio Institute (251 documents)
example document: Introduction to computers
|
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0003734081 / 1994-05-11
Date of Publication:
February 28, 1994
Date of Creation:
1994
Title:
Computer integrated manufacturing : using team integration environment, client user interface/2, client user interface/6000, release 1B.
Edition:
1st ed.
Basis of Claim:
New Matter: additions.
Previous Registration:
Prev. reg. as Integrating your heterogeneous enterprise with the IBM team integration environment, 1993, TX 3-731-952.
Description:
67 p.
Variant title:
Computer integrated manufacturing : using team integration environment, client user interface/2
Other Title:
Integrating your heterogeneous enterprise with the IBM team integration environment
Copyright Claimant:
Altium
Names:
Altium
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0003888710 / 1994-05-11
Date of Publication:
February 28, 1994
Date of Creation:
1994
Title:
Computer integrated manufacturing : creating and modifying applications for team integration environment, release 1B.
Edition:
1st ed.
Basis of Claim:
New Matter: additional text.
Previous Registration:
Prev. reg. 1993, TX 3-731-952.
Variant title:
Computer integrated manufacturing : creating and modifying applications for team integration environment
Copyright Claimant:
Altium
Names:
Altium
Computer integrated manufacturing in the petroleum industry
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0004077328 / 1995-08-28
Date of Publication:
June 15, 1995
Date of Creation:
1994
Title:
Computer integrated manufacturing in the petroleum industry.
Description:
Microfiche.
Copyright Claimant:
Robert Edward Harding, 1947-
Names:
Robert Edward Harding 1947-
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0004839607 / 1999-06-23
Date of Publication:
May 1, 1999
Date of Creation:
1999
Title:
Computer integrated manufacturing.
Description:
1 v.
Copyright Claimant:
Charitable Venture Foundation (Clifton Park, NY)
Names:
Charitable Venture Foundation (Clifton Park, NY)
Computer integrated manufacturing systems
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TXu000098569 / 1982-06-25
Date of Creation:
1982
Title:
Computer integrated manufacturing systems : an evaluation methodology.
Copyright Claimant:
Peter Sikli
Notes:
Cataloged from appl. only.
Authorship on Application:
entire text: Peter Sikli.
Names:
Peter Sikli 1950-
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TXu000404008 / 1989-08-04
Date of Creation:
1989
Title:
Computer integrated manufacturing / presented by Pelphrey Gilson & Associates.
Copyright Note:
C.O. correspondence.
Description:
sheets.
Copyright Claimant:
Pelphrey Gilson & Associates & Boeing Computer Services
Authorship on Application:
Michael W. Pelphrey d.b.a. Pelphrey Gilson & Associates, employer for hire.
Names:
Pelphrey Gilson & Associates
Boeing Computer Services
|
Boeing Computer Services
Computer integrated manufacturing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TXu000468468 / 1991-04-29
Date of Creation:
1990
Title:
Computer integrated manufacturing : computer numerical control machinist associate of applied science degree / Brian Keefe, Robert Malis, Albert Sciaky.
Copyright Claimant:
Moraine Valley Community College
Authorship on Application:
Moraine Valley Community College, employer for hire.
Names:
Robert Malis
Albert Sciaky
Brian Keefe
Moraine Valley Community College, Palos Hills, Ill.
Albert Sciaky
Brian Keefe
Moraine Valley Community College, Palos Hills, Ill.
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible. Multiple persons can share the same name.