American Welding Society documents |
title | Number of documents |
American Airlines plane on runway fronting building, Uniform design, Boeing 747-400 magic mug design | 30 |
American national standard for safe use of optical fiber communication systems utilizing laser diode and LED sources | 30 |
AWWA standard for cold-applied tape coatings for the exterior of special sections, connections, and fittings for steel water pipelines (C209-90) | 30 |
Catch the gold ring. By John Stephen Strange, pseud. of Dorothy Stockbridge Tillett | 30 |
Characterization of migratory flight potential in the tobacco budworm, Heliothis virescens (fabricius) part 2 | 30 |
Efficient materials and coatings applications for improved design and corrosion resistance part 2 | 30 |
Metallographic techniques and the characterization of composites, stainless steels, and other engineering materials | 30 |
Metallurgical transactions. A, Physical metallurgy and materials science, Directory of metallurgical consultants and translators | 18 |
Metallurgical transactions. A, Physical metallurgy and materials science, Eddy current testing | 30 |
Metals handbook. Vol. 1: Properties and selection of metals. Editor: Taylor Lyman | 30 |
Operator's manual chassis-4400 USPS (United States Postal Service) supplement, medium duty model 2645023R1, April 2004 part 2 | 30 |
Recommended practices for development of a safety and environmental management program for Outer Continental Shelf (OCS) operations and facilities | 30 |
Sheet metal layout through triangulation and short cuts, Sheet metal | 30 |
Specification 51062S--description of the 430920 weather font modification kit for buffered 42 (43-5-level) selective calling pin feed and friction feed teleprinters part 2 | 30 |
Specification for casing and tubing (combination of former specs 5A, 5C, 5AX, and 5AQ--casing and tubing requirements) | 30 |
Specification of initial operating capicity for RAMP/RTIF program implementation of type A manufacturing enterprise system specification for the RAPID acquisition of manufactured parts (RAMP) | 30 |
Standard procedures for calibrating magnetic instruments to measure the delta ferrite content of austenitic and duplex ferritic-austenitic stainless steel weld metal | 30 |
Standard welding procedure specification (SWPS) for argon plus 25% carbon dioxide shielded flux cored arc welding of carbon steel (M-1/P-1/S-1, groups 1 and 2), 1/8 through 1-1/2 inch thick, E7XT-X, As-welded or PWHT condition, primarily pipe applications | 30 |
Standard welding procedure specification (SWPS) for argon plus 25% carbon dioxide shielded flux cored arc welding of carbon steel (M-1/P-1/S-1, groups 1 and 2), 1/8 through 1-1/2 inch thick, E7XT-X, As-welded or PWHT condition, primarily pipe applications part 2 | 30 |
Standard welding procedure specification (SWPS) for gas tungsten arc welding with consumable insert root followed by shielded metal arc welding of carbon steel (M-1/P-1/S-1, groups 1 or 2) to austenitic stainless steel (M-8/P-8/S-8, group 1), 1/8 through 1-1/2 inch thick, IN309, ER309, and E309-15, -16, or -17, or IN309, ER309(L), and ER309(L)-15, -16, or -17, As-welded condition, primarily pipe applications | 30 |
Standard welding procedure specification (SWPS) for gas tungsten arc welding with consumable insert root followed by shielded metal arc welding of carbon steel (M-1/P-1/S-1, groups 1 or 2) to austenitic stainless steel (M-8/P-8/S-8, group 1), 1/8 through 1-1/2 inch thick, IN309, ER309, and E309-15, -16, or -17, or IN309, ER309(L), and ER309(L)-15, -16, or -17, As-welded condition, primarily pipe applications part 2 | 30 |
Standard welding procedure specification (SWPS) for gas tungsten arc welding with consumable insert root followed by shielded metal arc welding of carbon steel (M-1/P-1/S-1, groups 1 or 2) to austenitic stainless steel (M-8/P-8/S-8, group 1), 1/8 through 1-1/2 inch thick, IN309, ER309, and E309-15, -16, or -17, or IN309, ER309(L), and ER309(L)-15, -16, or -17, As-welded condition, primarily pipe applications part 3 | 30 |
Standard welding procedure specification (WPS) for Gas tungsten arc welding (consumable insert root) followed by shielded metal arc welding of chromium-molybdenum steel (M-4/P-4, group 1 or 2), 1/8 through 1/2 in. thick as-welded condition, 1/8 through 1-1/2 in thick, PWHT condition, IN515, ER80S-B2, and E8018-B2, primary pipe applications | 30 |
Standard welding procedure specification (WPS) for Gas tungsten arc welding (consumable insert root) followed by shielded metal arc welding of chromium-molybdenum steel (M-4/P-4, group 1 or 2), 1/8 through 1/2 in. thick as-welded condition, 1/8 through 1-1/2 in thick, PWHT condition, IN515, ER80S-B2, and E8018-B2, primary pipe applications part 2 | 30 |
Standard welding procedure specification (WPS) for gas tungsten arc welding followed by shielded metal arc welding of carbon steel (M-1/P-1/S-1, group 1 or 2), 1/8 through 1-1/2 inch thick, ER70S-2 and E7018, as-welded or PWHT condition, primarily pipe applications | 30 |
Standard welding procedure specification (WPS) for gas tungsten arc welding followed by shielded metal arc welding of carbon steel (M-1/P-1/S-1, group 1 or 2), 1/8 through 1-1/2 inch thick, ER70S-2 and E7018, as-welded or PWHT condition, primarily pipe applications part 2 | 28 |
Standard welding procedure specification (WPS) for gas tungsten arc welding with consumable insert followed by shielded metal arc welding of austenitic stainless steel (M-8/P-8/S-8, group 1), 1/8 through 1-1/2 inch thick, IN3XX, ER3XXX, and E3XX-XX, as-welded condition | 30 |
Standard welding procedure specification (WPS) for shielded metal arc welding of carbon steel to austenitic stainless steel, (M-1 to M-8 or P-8), 10 through 18 gauge, in the as-welded condition, with or without backing | 30 |
Standard welding procedure specification (WPS) shielded metal arc welding of carbon steel (M-1/P-1/S-1, group 1 or 2) 1/8 through 1-1/2 inch thick, E6010 (vertical uphill) followed by E7018 (vertical uphill) as-welded or PWHT condition | 30 |
Standard welding procedures specification (WPS) for gas tungsten arc welding followed by shielded metal art welding for austenitic stainless steel (M-8/P-8/S-8, group 1) 1/8 through 1-1/2 inch thick, ER3XX, E3XX-XX as-welded condition, primarily pipe applications part 2 | 25 |
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible. Multiple persons can share the same name.