National Electrical Manufacturers Association documents |
title | Number of documents |
American national standard--dimensions for 16mm 100-foot, 16mm 200-foot, 35mm 100-foot, and 70mm 100-foot spools for recording instruments and for microfilm and still-picture cameras | 30 |
American National Standard enclosed side-mounted luminaires for horizontal-burning high-intensity discharge lamps used in roadway lighting equipment | 27 |
American national standard for construction and demolition--commercial explosives and blasting agents--safety requirements for transportation, storage, handling, and use (new subclauses 6.1.3, 6.1.4, and 6.5.6.2 part 3 | 30 |
American National Standard for electric lamps--microfilm projection maps--two-inch (51mm) dichroic coated integral reflector, rim reference, tungsten halogen lamps with GX5.3 bases | 30 |
American national standard for electric lamps--single-ended tungsten-halogen lamps GZ9.5 base, T6 bulb, 36.5 mm LCL, 76.2 mm MOL with proximity reflector part 2 | 28 |
American national standard for high voltage switches, bus supports, and accessories, schedules of preferred ratings, construction guidelines, and specifications | 30 |
American national standard for high voltage switches, bus supports, and accessories, schedules of preferred ratings, construction guidelines, and specifications part 2 | 30 |
American national standard for roadway and area lighting equipment--enclosed side-mounted luminaires for horizontal-burning high-intensity discharge lamps--mechanical interchangeability of refractors part 2 | 30 |
American national standard for roadway and area lighting equipment--enclosed side-mounted luminaires for horizontal-burning high-intensity discharge lamps--mechanical interchangeability of refractors part 3 | 30 |
American national standard for roadway and area lighting equipment--enclosed side-mounted luminaires for horizontal-burning high-intensity discharge lamps--mechanical interchangeability of refractors part 4 | 30 |
American national standard for roadway and area lighting equipment--enclosed side-mounted luminaires for horizontal-burning high-intensity discharge lamps--mechanical interchangeability of refractors part 5 | 30 |
American national standard requirements for underground-type three-phase distribution transformers, 2500 kVA and smaller, high voltage 24 940GrdY/14 400 volts and below, low voltage 480 volts and below | 30 |
ANSI/ASME PTC33a-1980 appendix to A N S I/A S M E PTC33-1978, an American national standard, A S M E form for an abbreviated incinerator efficiency test (heat balance method) | 30 |
Application guidelines packet for the advanced practical nurse in genetics credential (APNG) and the genetics clinical nurse credential (GNC) | 20 |
Communication exchange behaviors of men and women from middle and lower socioeconomic class . part 3 | 30 |
Construction contract documents for The Oakwoods, apartments for the elderly, Saugatucket Road, South Kingstown, Rhode Island part 3 | 30 |
Data dictionary/directory systems; a management overview. By D B D Systems, Inc | 30 |
Data structures for global illumination computation and visibility queries in 3-space | 30 |
Determination of the solution structure of the N-terminal EGF-like domain of human blood clotting factor IX and investigation of its calcium binding site using two-dimensional-NMR techniques | 30 |
Determination of the structure of model peptides derived from intracrystalline biomineralization protein, SM50, byPFG-enhanced NMR experiments, and, a theoretical study of reversible unfolding/refolding of FNIII/Ig-like and PEVKdomains in titin and tenascin part 2 | 30 |
Determination of the structure of model peptides derived from intracrystalline biomineralization protein, SM50, byPFG-enhanced NMR experiments, and, a theoretical study of reversible unfolding/refolding of FNIII/Ig-like and PEVKdomains in titin and tenascin part 3 | 30 |
Digital imaging meets theme park ride planning at Boss Films and other contributions | 30 |
Electrical and electronic F E P fFluorinated ethylene propylene) insulated high temperature hook-up wire, types K (600 volt), KK (1000 volt), and KT (250 volt) | 30 |
Electrical and electronic F E P fFluorinated ethylene propylene) insulated high temperature hook-up wire, types K (600 volt), KK (1000 volt), and KT (250 volt) part 2 | 30 |
Electric lamps metal-halide method of measuring characteristics supplement, Air compressors | 30 |
General specification series 6000, Scientific arithmetic unit (SAU) Fortran support library | 22 |
Guidelines for inspection and preventive maintenance of molded case circuit breakers used in commercial and industrial applications | 30 |
How to have more time, money, and fun! ; Plus, The World's biggest con game exposed! part 2 | 30 |
ICEA/NEMA standards publication: WC 7-1982 (revision 3): cross-linked-thermosetting-polyethylene-insulated wire and cable for the transmission & distribution of electrical energy | 30 |
IEEE guide to the collection and presentation of electrical, electronic, sensing component, and mechanical equipment reliability data for nuclear-power generating stations part 2 | 28 |
Instructions for completing the record of welder/operator and brazer/operator qualification test and selection and correct use of the uniform welder and brazer performance qualification test part 2 | 30 |
Instructor's fault guide for model AA320B color television trainer, Motors and generators | 30 |
Material handling, rigging and hoisting; module 3, units 1-2. By National Elevator Industry Educational Program | 30 |
Measurement of the ratio sigma.BR(W(+/-) [arrow] L(+/-)neutrino)/sigma.BR(neutral Z [arrow] L(+)L(-)) and interpretation at the Cern proton-antiproton collider | 30 |
Measurement of the ratio sigma.BR(W(+/-) [arrow] L(+/-)neutrino)/sigma.BR(neutral Z [arrow] L(+)L(-)) and interpretation at the Cern proton-antiproton collider part 2 | 30 |
NEMA standards publication RN 1-1986 polyvinyl-chloride (PVC) externally coated galvanized rigid steel conduit and intermediate metal conduit | 30 |
Nomenclature, top side: no. 87X0844-001 (technical drawing: circuit board) VA 242-257 | 30 |
Preventive maintenance for a small manufacturing or processing plant | 30 |
Procedures for field inspection and performance verification of molded case circuit breakers used in commercial and industrial applications | 30 |
Procedures for field inspection and performance verification of molded case circuit breakers used in commercial and industrial applications part 2 | 30 |
Product safety/product liability control system manual, International Safety Rating | 30 |
Recommended practice for an on-site, ad hoc test method for estimating radiated electromagnetic immunity of medical devices to specific radio-frequency transmitters | 30 |
Rev 800 freight manifest module (freight manifest-rev 800), Message exchange system | 29 |
Revision no. 1 to the I C E A/N E M A standards publication for cross-linked-thermosetting-polyethylene-insulated wire and cable for the transmission and distribution of electrical energy | 30 |
Revision no. 1 to the I C E A/N E M A standards publication for cross-linked-thermosetting-polyethylene-insulated wire and cable for the transmission and distribution of electrical energy part 2 | 30 |
Revision no. 1 to the I C E A/N E M A standards publication for cross-linked-thermosetting-polyethylene-insulated wire and cable for the transmission and distribution of electrical energy part 3 | 30 |
Revision number 6 to the I C E A/N E M A standards publication for thermoplastic-insulated wire and cable for the transmission and distribution of electrical energy | 30 |
Standard test method for density, relative density, and API gravity of crude petroleum and liquid petroleum by thermohydrometer method | 30 |
Traffic control: program no. 7, operations manual, version 1 | 27 |
Transportation network models and algorithms considering directional delay and prohibition for intersection movement part 5 | 30 |
User's manual for the Gas Research Institute natural gas industry environmental, health, and safety information system part 3 | 30 |
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible. Multiple persons can share the same name.