Welding cast iron in flat position with electric arc, hard facing surfaces with electric arc part 4
Three methods for facing work to length
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094858 / 1981-02-19
Date of Publication:
March 23, 1978
Date of Creation:
1978
Title:
Three methods for facing work to length.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia))
Series:
Machine technology II ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (20 min.) : sd., col. ; 1/2 in.
Other Title:
Machine tech II ; program 7
Three methods of facing work to length.
Machine technology II ; lesson 7
Three methods of facing work to length.
Machine technology II ; lesson 7
Copyright Claimant:
Omnia Corporation
Notes:
Series title on description: Machine tech II ; program 7.
Title on description: Three methods of facing work to length.
Deposit includes description (1 p.).
Title on description: Three methods of facing work to length.
Deposit includes description (1 p.).
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (137 documents)
example document: Vital signs
Omnia Corporation. Studio North
example document: Vital signs
|
|
Omnia Corporation. Studio North
|
|
The Engine lathe
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094859 / 1981-02-19
Date of Publication:
March 3, 1978
Date of Creation:
1978
Title:
The Engine lathe.
Application Title:
Identification of parts and care of the engine lathe.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia Corporation))
Series:
Machine technology II ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (13 min.) : sd., col. ; 1/2 in.
Other Title:
Machine technology II ; lesson 1
Machine tech II ; program 1
Machine tech II ; program 1
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.).
Series title on description: Machine tech II ; program 1.
Series title on description: Machine tech II ; program 1.
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Vertical band machine
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094860 / 1981-02-19
Date of Publication:
June 16, 1978
Date of Creation:
1978
Title:
Vertical band machine : sawing and use of accessories.
Application Title:
Setting the bandsaw up for sawing and use of accessories.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia Corporation))
Series:
Machine technology I ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (14 min.) : sd., col. ; 1/2 in.
Number of similar titles:
2
Variant title:
Vertical band machine : sawing and use of accessories.
Other Title:
Machine technology I ; lesson 14
Sawing and use of accessories.
Setting the bandsaw up for sawing and use of accessories.
Sawing and use of accessories.
Setting the bandsaw up for sawing and use of accessories.
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.).
Title on description: Sawing and use of accessories.
Title on description: Sawing and use of accessories.
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Vertical band machine--butt welding saw blades
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094861 / 1981-02-19
Date of Publication:
June 16, 1978
Date of Creation:
1978
Title:
Vertical band machine--butt welding saw blades.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia Corporation)
Series:
Machine technology I ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (10 min.) : sd., col. ; 1/2 in.
Other Title:
Machine technology I ; lesson 13
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Vertical band machine--parts and accessories
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094862 / 1981-02-19
Date of Publication:
June 16, 1978
Date of Creation:
1978
Title:
Vertical band machine--parts and accessories.
Application Title:
Vertical bandsaw--parts and accessories.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine technology I ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (10 min.) : sd., col. ; 1/2 in.
Other Title:
Machine technology I ; lesson 12
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Hand hacksaws and files
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094863 / 1981-02-19
Date of Publication:
October 6, 1978
Date of Creation:
1978
Title:
Hand hacksaws and files.
Application Title:
Hand hacksaw and filling [sic] procedures.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine technology I ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (14 min.) : sd., col. ; 1/2 in.
Other Title:
Machine technology I ; lesson 11
Hand hacksaw and filing procedures
Hand hacksaw and filing procedures
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Drill press operations
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094864 / 1981-02-19
Date of Publication:
October 13, 1978
Date of Creation:
1978
Title:
Drill press operations.
Application Title:
Operations frequently performed on the drill press.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine technology I ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (12 min.) : sd., col. ; 1/2 in.
Other Title:
Machine technology I ; lesson 10
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Sensitive and radial drill presses
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094865 / 1981-02-19
Date of Publication:
October 13, 1978
Date of Creation:
1978
Title:
Sensitive and radial drill presses.
Application Title:
Drill presses (sensitive and radial)
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine technology I ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (8 min.) : sd., col. ; 1/2 in.
Other Title:
Machine technology I ; lesson 9
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Sharpening drill bits
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094866 / 1981-02-19
Date of Publication:
October 6, 1978
Date of Creation:
1978
Title:
Sharpening drill bits.
Application Title:
Sharpening drill BII's [sic] by hand & machine.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine technology I ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (12 min.) : sd., col. ; 1/2 in.
Number of similar titles:
2
Similar Title:
Other Title:
Sharpening drill bits by hand & machine
Machine technology I ; lesson 8
Machine technology I ; lesson 8
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
The Pedestal grinder
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094867 / 1981-02-19
Date of Publication:
August 25, 1978
Date of Creation:
1978
Title:
The Pedestal grinder.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine technology I ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (9 min.) : sd., col. ; 1/2 in.
Number of similar titles:
1
Other Title:
Machine technology I ; lesson 7
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Machine offset holes--face plate and 4-jaw chuck
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094868 / 1981-02-19
Date of Publication:
May 15, 1978
Date of Creation:
1978
Title:
Machine offset holes--face plate and 4-jaw chuck.
Application Title:
Machining offset holes--face plate and 4-jaw chuck.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary)
Series:
Machine technology III ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (18 min.) : sd., col. ; 1/2 in.
Other Title:
Machine technology III ; lesson 11
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Chasing tapered pipe threads on the lathe
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094869 / 1981-02-19
Date of Publication:
April 20, 1979
Date of Creation:
1979
Title:
Chasing tapered pipe threads on the lathe.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary)
Series:
Machine technology III ;
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (10 min.) : sd., col. ; 1/2 in.
Number of similar titles:
5
Similar Title:
Other Title:
Machine technology III ; lesson 10
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Cutting internal threads
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094870 / 1981-02-19
Date of Publication:
April 9, 1979
Date of Creation:
1979
Title:
Cutting internal threads.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary)
Series:
Machine technology III ;
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (10 min.) : sd., col. ; 1/2 in.
Number of similar titles:
5
Other Title:
Machine technology III ; lesson 8
Cutting internal threads on the lathe.
Cutting internal threads on the lathe.
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.).
Authorship on Application:
Omnia Corporation, employer for hire.
Performer:
Title on description: Cutting internal threads on the lathe.
Names:
Knurling on the lathe
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094871 / 1981-02-19
Date of Publication:
March 23, 1978
Date of Creation:
1978
Title:
Knurling on the lathe.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine technology II ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (15 min.) : sd., col. ; 1/2 in.
Number of similar titles:
2
Other Title:
Machine technology II ; lesson 14
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Drilling, boring, and reaming
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094872 / 1981-02-19
Date of Publication:
April 20, 1978
Date of Creation:
1978
Title:
Drilling, boring, and reaming.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine technology II ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (20 min.) : sd., col. ; 1/2 in.
Other Title:
Machine technology II ; lesson 10
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Turning between centers
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094873 / 1981-02-19
Date of Publication:
March 23, 1978
Date of Creation:
1978
Title:
Turning between centers.
Application Title:
Straight turning between centers.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine technology II ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (17 min.) : sd., col. ; 1/2 in.
Number of similar titles:
3
Similar Title:
Other Title:
Machine technology II ; lesson 9
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Straight turning work of 2 diameters
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094874 / 1981-02-19
Date of Publication:
January 18, 1977
Date of Creation:
1977
Title:
Straight turning work of 2 diameters.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine technology II ;
Imprint:
[s.l. : s.n.], c1977.
Description:
1 videocassette (Betamax) (13 min.) : sd., col. ; 1/2 in.
Other Title:
Machine technology II ; lesson 8
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Grinding a round nose finishing tool
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094875 / 1981-02-19
Date of Publication:
March 3, 1978
Date of Creation:
1978
Title:
Grinding a round nose finishing tool.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine technology II ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (11 min.) : sd., col. ; 1/2 in.
Number of similar titles:
1
Other Title:
Machine technology II ; lesson 5
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Grinding a right hand roughing tool
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094876 / 1981-02-19
Date of Publication:
November 18, 1977
Date of Creation:
1977
Title:
Grinding a right hand roughing tool.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine technology II ;
Imprint:
[s.l. : s.n.], c1977.
Description:
1 videocassette (Betamax) (13 min.) : sd., col. ; 1/2 in.
Number of similar titles:
1
Other Title:
Machine technology II ; lesson 4
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Engine lathe accessories
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094877 / 1981-02-19
Date of Publication:
March 3, 1978
Date of Creation:
1978
Title:
Engine lathe accessories.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine technology II ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (13 min.) : sd., col. ; 1/2 in.
Number of similar titles:
3
Other Title:
Machine technology II ; lesson 2
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Gouging of 2 and 4 flute end mills
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097746 / 1981-04-07
Date of Publication:
June 24, 1979
Date of Creation:
1979
Title:
Gouging of 2 and 4 flute end mills.
Application Title:
Gouging of end mill 2 and 4 flute.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary)
Series:
Machine tech IV ;
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (V H S) (ca. 15 min.) : sd., col. ; 1/2 in.
Other Title:
Machine tech IV ; lesson 11
Gouging of two- and four-flute end mills.
Gouging of two- and four-flute end mills.
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.).
Title on description: Gouging of two- and four-flute end mills.
Title on description: Gouging of two- and four-flute end mills.
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Decimals and tolerances
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097747 / 1981-03-25
Date of Publication:
August 27, 1980
Date of Creation:
1980
Title:
Decimals and tolerances.
Application Title:
Introducing the metrics.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary)
Series:
Shop math II ;
Imprint:
[s.l. : s.n.], c1980.
Description:
1 videocassette (Betamax) (15 min.) : sd., col. ; 1/2 in.
Other Title:
Shop math II ; lesson 2
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (137 documents)
example document: No titles given
Omnia Corporation. Studio North.
example document: No titles given
Omnia Corporation. Studio North.
|
|
Using the cutoff tool on the lathe
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097748 / 1981-03-25
Date of Publication:
March 9, 1979
Date of Creation:
1979
Title:
Using the cutoff tool on the lathe.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary)
Series:
Machine tech III ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (12 min.) : sd., col. ; 1/2 in.
Number of similar titles:
1
Other Title:
Machine tech III ; program 3
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.).
Title on description: Using the cut-off tool on the lathe.
Title on description: Using the cut-off tool on the lathe.
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Measuring internal and external threads
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097749 / 1981-03-25
Date of Publication:
February 16, 1979
Date of Creation:
1979
Title:
Measuring internal and external threads.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary)
Series:
Machine tech III ;
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (16 min.) : sd., col. ; 1/2 in.
Other Title:
Machine tech III ; program 4
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Tap and die threading on the lathe
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097750 / 1981-03-25
Date of Publication:
February 16, 1979
Date of Creation:
1979
Title:
Tap and die threading on the lathe.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary)
Series:
Machine tech III ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (14 min.) : sd., col. ; 1/2 in.
Other Title:
Machine tech III ; program 5
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Spring winding on the lathe
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097751 / 1981-03-25
Date of Publication:
May 12, 1979
Date of Creation:
1979
Title:
Spring winding on the lathe.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary)
Series:
Machine tech III ;
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (8 min.) : sd., col. ; 1/2 in.
Number of similar titles:
4
Other Title:
Machine tech III ; program 14
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Cutting speeds and feeds for engine lathe--ferrous, non-ferrous, and plastics
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097752 / 1981-03-25
Date of Publication:
April 20, 1978
Date of Creation:
1978
Title:
Cutting speeds and feeds for engine lathe--ferrous, non-ferrous, and plastics.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary)
Series:
Machine tech III ;
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (16 min.) : sd., col. ; 1/2 in.
Other Title:
Machine tech III ; program 3
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Equations and formulas
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097754 / 1981-03-25
Date of Publication:
September 10, 1980
Date of Creation:
1980
Title:
Equations and formulas.
Application Title:
Algebra-trigonometry.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary)
Series:
Shop math ;
Imprint:
[s.l. : s.n.], c1980.
Description:
1 videocassette (Betamax) (13 min.) : sd., col. ; 1/2 in.
Other Title:
Shop math; program 3
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Multi-pass electric arc welding
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097756 / 1981-04-07
Date of Publication:
August 3, 1979
Date of Creation:
1979
Title:
Multi-pass electric arc welding.
Credits:
Produced by Omnia Corporation and Studio North (subsidiary of Omnia Corporation)
Series:
Welding series II ;
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (11 min.) : sd., col. ; 1/2 in.
Number of similar titles:
2
Similar Title:
Other Title:
Welding series II ; lesson 14
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
T-joint, lap joint, outside corner weld in a horizontal position with S M A W
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097757 / 1981-04-07
Date of Publication:
July 14, 1979
Date of Creation:
1979
Title:
T-joint, lap joint, outside corner weld in a horizontal position with S M A W.
Application Title:
T-joint, lap joint, outside corner joint in a horizontal position with S M A W.
Credits:
Produced by Omnia Corporation and Studio North (subsidiary of Omnia Corporation)
Series:
Welding series II ;
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (12 min.) : sd., col. ; 1/2 in.
Other Title:
Welding series II ; lesson 9
T-joint, lap joint, and outside corner joint in the horizontal position with S M A W
T-joint, lap joint, and outside corner joint in the horizontal position with S M A W
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.).
Description ti.: T-joint, lap joint, and outside corner joint in the horizontal position with S M A W.
Description ti.: T-joint, lap joint, and outside corner joint in the horizontal position with S M A W.
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible. Multiple persons can share the same name.