Welding cast iron in flat position with electric arc, hard facing surfaces with electric arc part 6





Toolmaker's vise

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094841 / 1981-02-27
Date of Publication:
February 1, 1980
Date of Creation:
1979
Title:
Toolmaker's vise.
Credits:
Produced by Omnia Corporation.
Series:
Blueprint reading ; program 3
Imprint:
[s.l. : s.n.], c1980.
Description:
1 videocassette (V H S) (16 min.) : sd., col. ; 1/2 in.
Number of similar titles:
4
Similar Title:
Other Title:
Blueprint reading ; program 3
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Semiconductor memories "read/write memories"

Copyrights records by Omnia Corporation



Pulley bar

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094842 / 1981-02-27
Date of Publication:
February 1, 1980
Date of Creation:
1980
Title:
Pulley bar.
Series:
Blueprint reading ; course 1
Imprint:
[s.l. : s.n.], c1980.
Description:
1 videocassette (Betamax) (12 min.) : sd., col. ; 1/2 in.
Other Title:
Blueprint reading ; course 1
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Machine setup and safety

Wheel puller

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097753 / 1981-03-25
Date of Publication:
February 1, 1980
Date of Creation:
1980
Title:
Wheel puller.
Series:
Blueprint reading ; program 2
Imprint:
[s.l. : s.n.], c1980.
Description:
1 videocassette (Betamax) (14 min.) : sd., col. ; 1/2 in.
Number of similar titles:
7
Other Title:
Blueprint reading ; program 2
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Cutting acme threads

Running continuous beads in horizontal and vertical down position

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097761 / 1981-04-07
Date of Publication:
June 1, 1979
Date of Creation:
1979
Title:
Running continuous beads in horizontal and vertical down position.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia Corporation)
Series:
Welding series II ; lesson 5
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (10 min.) : sd., col. ; 1/2 in.
Number of similar titles:
1
Other Title:
Welding series II ; lesson 5
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Equations and formulas
Omnia Corporation. Studio North (68 documents)
example document: Angles, triangles, and trigonometry

Copyrights records by Omnia Corporation. Studio North



T-joint, lap joint, outside corner weld in a vertical up position with S M A W

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097764 / 1981-04-07
Date of Publication:
July 20, 1979
Date of Creation:
1979
Title:
T-joint, lap joint, outside corner weld in a vertical up position with S M A W.
Credits:
Produced by Omnia Corporation and Studio North (subsidiary of Omnia Corporation)
Series:
Welding series II ; lesson 10
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (9 min.) : sd., col. ; 1/2 in.
Other Title:
T-joint, lap joint, outside corner joint in the vertical up position with S M A W
Welding series II ; lesson 10
Copyright Claimant:
Omnia Corporation
Notes:
Description ti.: T-joint, lap joint, outside corner joint in the vertical up position with S M A W.
Deposit includes description (1 p.).
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Say it right
Omnia Corporation. Studio North (68 documents)
example document: Flat and horizontal butt welds with filler rod

Striking an arc, restarting the arc, and running a continuous bead in the flat position

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097765 / 1981-04-07
Date of Publication:
June 1, 1979
Date of Creation:
1979
Title:
Striking an arc, restarting the arc, and running a continuous bead in the flat position.
Credits:
Produced by Omnia Corporation and Studio North (subsidiary of Omnia Corporation)
Series:
Welding series II ; lesson 4
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (13 min.) : sd., col. ; 1/2 in.
Other Title:
Welding series II ; lesson 4
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Safety in electric arc welding and terms
Omnia Corporation. Studio North (68 documents)
example document: Grinding a right hand roughing tool

Electric arc welding in flat, horizontal, vertical, and overhead butt welds

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097770 / 1981-04-07
Date of Publication:
June 22, 1979
Date of Creation:
1979
Title:
Electric arc welding in flat, horizontal, vertical, and overhead butt welds.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia Corporation)
Series:
Welding series ; set 2, lesson 7
Imprint:
[s.l. : s.n., 19--]
Description:
1 videocassette (Betamax) (13 min.) : sd., col. ; 1/2 in.
Other Title:
Welding series ; set 2, lesson 7
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation. Studio North (68 documents)
example document: Sensitive and radial drill presses

Electric arc power sources and minor maintenance

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097771 / 1981-04-07
Date of Publication:
August 16, 1979
Date of Creation:
1979
Title:
Electric arc power sources and minor maintenance.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia Corporation)
Series:
Welding series ; set 2, lesson 1
Imprint:
[s.l. : s.n., 19--]
Description:
1 videocassette (Betamax) (13 min.) : sd., col. ; 1/2 in.
Other Title:
Welding series ; set 2, lesson 1
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (2 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Hand hacksaws and files
Omnia Corporation. Studio North (68 documents)
example document: Drilling, boring, and reaming

Welding cast iron in flat position with electric arc, hard facing surfaces with electric arc

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000099846 / 1981-04-07
Date of Publication:
July 20, 1979
Date of Creation:
1979
Title:
Welding cast iron in flat position with electric arc, hard facing surfaces with electric arc.
Credits:
Produced by Omnia Corporation and Studio North (subsidiary of Omnia Corporation)
Series:
Welding series ; set 2, lesson 12
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (8 min.) : sd., col. ; 1/2 in.
Number of similar titles:
4
Other Title:
Welding cast iron in the flat position with an electric arc and hard-facing surfaces with an electric arc.
Welding series ; set 2, lesson 12
Copyright Claimant:
Omnia Corporation
Notes:
Title on description: Welding cast iron in the flat position with an electric arc and hard-facing surfaces with an electric arc.
Deposit includes description (2 p.).
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Sensitive and radial drill presses
Omnia Corporation. Studio North (68 documents)
example document: Machine offset holes--face plate and 4-jaw chuck

Set-ups for holding work to be milled

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000126927 / 1982-01-20
Date of Publication:
July 27, 1979
Date of Creation:
1979
Title:
Set-ups for holding work to be milled.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Copyright Note:
C.O. correspondence.
Series:
Machine tech IV ; lesson 7
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (VHS) (ca. 15 min.) : sd., col. ; 1/2 in.
Other Title:
Setup for holding work to be milled
Machine tech IV ; lesson 7
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.) with title Setup for holding work to be milled.
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Vertical band machine--butt welding saw blades
Omnia Corporation. Studio North (68 documents)
example document: Mounting & truing work in the 4-jaw independent chuck
Studio North, subsidiary of Omnia. (1 documents)
example document: Whole numbers and fractions

Filling and polishing

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000129511 / 1982-02-02
Date of Publication:
March 23, 1978
Date of Creation:
1978
Title:
Filling and polishing.
Application Title:
Filling and polishing on the engine lathe.
Credits:
Produced by Omnia Corporation & Studio North (subsidiary of Omnia)
Series:
Machine tech II ; program 13
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (13 min.) : sd., col. ; 1/2 in.
Number of similar titles:
7
Other Title:
Machine tech II ; program 13
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Performer:
Presented by Doall.
Names:
Omnia Corporation (307 documents)
example document: Drill press operations
Omnia Corporation. Studio North (68 documents)
example document: Drill press operations
Doall.

Sharpening brazed carbide lathe tools using a universal vise

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000132001 / 1982-01-20
Date of Publication:
June 30, 1979
Date of Creation:
1979
Title:
Sharpening brazed carbide lathe tools using a universal vise / co-produced by Vista Learning Programs, education division of Omnia Corporation and Cambridge, a New York Times company ; produced in cooperation with 916 Area Vocational Technical Institute.
Application Title:
Sharpening lathe tools including N/C lathe tools.
Credits:
Produced by Omnia Corporation (on description)
Series:
Machine technology IV ; lesson no. 14
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (13 min.) : sd., col. ; 3/4 in.
Other Title:
Machine technology IV ; lesson no. 14
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Circular milling
916 Area Vocational Technical Institute, White Bear Lake, Minn. (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation. Vista Learning Programs (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Cambridge (13 documents)
example document: Threshold

Copyrights records by Cambridge


Vista Learning Programs, education division of Omnia Corporation.

Sharpening the periphery of plain milling cutters and side mills

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000132002 / 1982-01-20
Date of Publication:
July 7, 1979
Date of Creation:
1979
Title:
Sharpening the periphery of plain milling cutters and side mills / co-produced by Vista Learning Programs, education division of Omnia Corporation and Cambridge, a New York Times company ; produced in cooperation with 916 Area Vocational Technical Institute.
Application Title:
Sharpening side milling cutters, slitting saws & staggered tooth cutters.
Credits:
Produced by Omnia Corporation (on description)
Series:
Machine technology IV ; lesson no. 13
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (19 min.) : sd., col. ; 3/4 in.
Other Title:
Machine technology IV ; lesson no. 13
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Drill press operations
916 Area Vocational Technical Institute, White Bear Lake, Minn. (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation. Vista Learning Programs (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Cambridge (13 documents)
example document: Threshold

Sharpening a reamer between centers

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000132003 / 1982-01-20
Date of Publication:
July 1, 1979
Date of Creation:
1979
Title:
Sharpening a reamer between centers / co-produced by Vista Learning Programs, education division of Omnia Corporation and Cambridge, a New York Times company ; produced in cooperation with 916 Area Vocational Technical Institute.
Application Title:
Reamer sharpening between centers.
Credits:
Produced by Omnia Corporation (on description)
Series:
Machine technology IV ; lesson no. 12
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (10 min.) : sd., col. ; 3/4 in.
Other Title:
Machine technology IV ; lesson no. 12
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Blueprint reading for welders produced by Omnia Corporation
916 Area Vocational Technical Institute, White Bear Lake, Minn. (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation. Vista Learning Programs (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Cambridge (13 documents)
example document: Threshold

Sharpening ends of end mills

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000132004 / 1982-01-20
Date of Publication:
June 17, 1979
Date of Creation:
1979
Title:
Sharpening ends of end mills / co-produced by Vista Learning Programs, education division of Omnia Corporation and Cambridge, a New York Times company ; produced in cooperation with 916 Area Vocational Technical Institute.
Credits:
Produced by Omnia Corporation (on description)
Series:
Machine technology IV ; lesson 10
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (13 min.) : sd., col. ; 3/4 in.
Number of similar titles:
6
Other Title:
Machine technology IV ; lesson 10
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Performer:
Presented by DoAll.
Names:
Omnia Corporation (307 documents)
example document: Cutter radius compensation
DoAll.
916 Area Vocational Technical Institute, White Bear Lake, Minn. (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation. Vista Learning Programs (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Cambridge (13 documents)
example document: Threshold

Sharpening the periphery of an end mill

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000132005 / 1982-01-20
Date of Publication:
May 9, 1979
Date of Creation:
1979
Title:
Sharpening the periphery of an end mill / co-produced by Vista Learning Programs, education division of Omnia Corporation and Cambridge, a New York Times company ; produced in cooperation with 916 Area Vocational Technical Institute.
Application Title:
Sharpening the periphery of end mills.
Credits:
Produced by Omnia Corporation (on description)
Series:
Machine technology IV ; lesson 9
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (14 min.) : sd., col. ; 3/4 in.
Other Title:
Machine technology IV ; lesson 9
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Performer:
Presented by DoAll.
Names:
Omnia Corporation (307 documents)
example document: The Pedestal grinder
DoAll (5 documents)
example document: Identification of parts and operation of the vertical milling machine
916 Area Vocational Technical Institute, White Bear Lake, Minn. (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation. Vista Learning Programs (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Cambridge (13 documents)
example document: Identification of parts and operation of the vertical milling machine

The Horizontal milling machine

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000132006 / 1982-01-20
Date of Publication:
July 14, 1979
Date of Creation:
1979
Title:
The Horizontal milling machine / co-produced by Vista Learning Programs, education division of Omnia Corporation and Cambridge, a New York Times company ; produced in cooperation with 916 Area Vocational Technical Institute.
Credits:
Produced by Omnia Corporation (on description)
Series:
Machine technology IV ; lesson 6
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (9 min.) : sd., col. ; 3/4 in.
Other Title:
Identification of parts and operation of the horizontal milling machine.
Machine technology IV ; lesson 6
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Title on container: Identification of parts and operation of the horizontal milling machine.
Authorship on Application:
Omnia Corporation, employer for hire.
Performer:
Presented by DoAll.
Names:
Omnia Corporation (307 documents)
example document: Vertical and overhead butt welds with filler rod
DoAll (5 documents)
example document: Identification of parts and operation of the vertical milling machine
916 Area Vocational Technical Institute, White Bear Lake, Minn. (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation. Vista Learning Programs (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Cambridge (13 documents)
example document: Threshold

Cutters and machining on the vertical milling machine

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000132007 / 1982-01-20
Date of Publication:
March 22, 1979
Date of Creation:
1979
Title:
Cutters and machining on the vertical milling machine / co-produced by Vista Learning Programs, education division of Omnia Corporation and Cambridge, a New York Times company ; produced in cooperation with 916 Area Vocational Technical Institute.
Credits:
Produced by Omnia Corporation (on description)
Series:
Machine technology IV ; lesson 2
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (18 min.) : sd., col. ; 3/4 in.
Other Title:
Cutters and machining operations for the vertical milling machine.
Machine technology IV ; lesson 2
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Title on container: Cutters and machining operations for the vertical milling machine.
Authorship on Application:
Omnia Corporation, employer for hire.
Performer:
Presented by DoAll.
Names:
Omnia Corporation (307 documents)
example document: Pre-participation physical examination of the athlete
DoAll (5 documents)
example document: Identification of parts and operation of the vertical milling machine
916 Area Vocational Technical Institute, White Bear Lake, Minn. (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation. Vista Learning Programs (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Cambridge (13 documents)
example document: Identification of parts and operation of the vertical milling machine

T-weld, lap weld, and outside corner joint

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000132009 / 1982-01-20
Date of Publication:
June 29, 1979
Date of Creation:
1979
Title:
T-weld, lap weld, and outside corner joint / co-produced by Vista Learning Programs, education division of Omnia Corporation and Cambridge, a New York Times company ; produced in cooperation with 916 Area Vocational Technical Institute.
Application Title:
T-joint, lap joint, outside corner joint in flat position.
Credits:
Produced by Omnia Corporation (on description)
Series:
Welding II ; lesson 8
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (9 min.) : sd., col. ; 3/4 in.
Other Title:
T-weld, lap and outside corner welds in flat position.
Welding II ; lesson 8
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (2 p.)
Title on container: T-weld, lap and outside corner welds in flat position.
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: Blueprint reading for welders produced by Omnia Corporation
916 Area Vocational Technical Institute, White Bear Lake, Minn. (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation. Vista Learning Programs (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Cambridge (13 documents)
example document: Threshold

General welding symbols

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000232385 / 1984-09-28
Date of Publication:
August 24, 1982
Date of Creation:
1982
Title:
General welding symbols : pt. 1 / produced by Omnia Corporation.
Series:
Blueprint reading for welders ; program no. 2
Imprint:
[Edina, MN] : The Corporation, c1982.
Description:
1 videocassette (Beta) (15 min.) : sd., col. ; 1/2 in.
Number of similar titles:
29
Variant title:
General welding symbols : pt. 1
Other Title:
Blueprint reading for welders ; program no. 2
Copyright Claimant:
Omnia Corporation
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: T-joint, lap joint, outside corner weld in a horizontal position with S M A W

General welding symbols

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000232386 / 1984-09-28
Date of Publication:
January 13, 1983
Date of Creation:
1983
Date in Notice:
notice: 1982
Title:
General welding symbols : pt. 2 / produced by Omnia Corporation.
Series:
Blueprint reading for welders ; program no. 3
Imprint:
[Edina, MN] : The Corporation, c1982.
Description:
1 videocassette (Beta) (15 min.) : sd., col. ; 1/2 in.
Number of similar titles:
29
Variant title:
General welding symbols : pt. 2
Other Title:
Blueprint reading for welders ; program no. 3
Copyright Claimant:
Omnia Corporation
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (307 documents)
example document: The Pedestal grinder

Roughing and finishing external threads on the lathe

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000246857 / 1985-03-25
Date of Publication:
April 9, 1979
Date of Creation:
1979
Title:
Roughing and finishing external threads on the lathe / produced in cooperation with 916 Area Vocational Technical Institute ; co-produced by Vista Learning Programs, education division of Omnia Corporation, and Cambridge, a New York Times company.
Series:
Machine technology III ; no. 7
Imprint:
[Edina, MN] : Omnia Corp., c1979.
Description:
1 videocassette (Beta) (15 min.) : sd., col. ; 1/2 in.
Number of similar titles:
3
Other Title:
Machine technology III ; no. 7
Copyright Claimant:
Omnia Corporation
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation. Vista Learning Programs (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation (307 documents)
example document: Sharpening drill bits
916 Area Vocational Technical Institute, White Bear Lake, Minn. (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Cambridge (13 documents)
example document: Identification of parts and operation of the vertical milling machine
Vista Learning Programs, education division of Omnia Corporation.

Machining shoulders and corners on the lathe

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000246858 / 1985-03-25
Date of Publication:
February 9, 1979
Date of Creation:
1978
Date in Notice:
notice: 1978
Title:
Machining shoulders and corners on the lathe / produced in cooperation with 916 Area Vocational Technical Institute ; co-produced by Vista Learning Programs, education division of Omnia Corporation, and Cambridge, a New York Times company.
Series:
Machine technology III ; no. 2
Imprint:
[Edina, MN] : Omnia Corp., c1978.
Description:
1 videocassette (Beta) (16 min.) : sd., col. ; 1/2 in.
Number of similar titles:
3
Other Title:
Machine technology III ; no. 2
Copyright Claimant:
Omnia Corporation
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation. Vista Learning Programs (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation (307 documents)
example document: The Pedestal grinder
916 Area Vocational Technical Institute, White Bear Lake, Minn. (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Cambridge (13 documents)
example document: Threshold

Plain and side milling cutters

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000246859 / 1985-03-25
Date of Publication:
August 10, 1979
Date of Creation:
1979
Title:
Plain and side milling cutters / produced in cooperation with 916 Area Vocational Technical Institute ; co-produced by Vista Learning Programs, education division of Omnia Corporation, and Cambridge, a New York Times company.
Series:
Machine technology IV ; no. 5
Imprint:
[Edina, MN] : Omnia Corp., c1979.
Description:
1 videocassette (Beta) (12 min.) : sd., col. ; 1/2 in.
Other Title:
Use of plain and side milling cutters on the horizontal milling machine
Machine technology IV ; no. 5
Copyright Claimant:
Omnia Corporation
Notes:
Title on description: Use of plain and side milling cutters on the horizontal milling machine.
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation. Vista Learning Programs (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation (307 documents)
example document: Basic engine lathe
916 Area Vocational Technical Institute, White Bear Lake, Minn. (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Cambridge (13 documents)
example document: Threshold

Use of dividing head and rotary table

Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000246860 / 1985-03-25
Date of Publication:
July 15, 1979
Date of Creation:
1979
Title:
Use of dividing head and rotary table / produced in cooperation with 916 Area Vocational Technical Institute ; co-produced by Vista Learning Programs, education division of Omnia Corporation, and Cambridge, a New York Times company.
Series:
Machine technology IV ; no. 3
Imprint:
[Edina, MN] : Omnia Corp., c1979.
Description:
1 videocassette (Beta) (12 min.) : sd., col. ; 1/2 in.
Number of similar titles:
3
Other Title:
Machine technology IV ; no. 3
Copyright Claimant:
Omnia Corporation
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation. Vista Learning Programs (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation (307 documents)
example document: Vertical band machine--butt welding saw blades
916 Area Vocational Technical Institute, White Bear Lake, Minn. (12 documents)
example document: Identification of parts and operation of the vertical milling machine
Cambridge (13 documents)
example document: Threshold

This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible. Multiple persons can share the same name.