Butt joint, T-joint, lap joint, and outside corner joints in the vertical and overhead position with M. I. G
Welding equipment, accessories, and safety
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094703 / 1981-01-26
Date of Publication:
January 15, 1979
Date of Creation:
1979
Title:
Welding equipment, accessories, and safety.
Application Title:
Oxy-acetylene welding (for series title)
Credits:
Produced by Omnia Corporation through the facilities of Studio North (subsidiary of Omnia Corporation)
Series:
Welding series ; set 1, lesson 1
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (14 min.) : sd., col. ; 1/2 in.
Other Title:
Welding series ; set 1, lesson 1
Welding equipment, accessories, and shop safety.
Omnia Corporation. Studio North
Oxy-acetylene welding
Welding equipment, accessories, and shop safety.
Omnia Corporation. Studio North
Oxy-acetylene welding
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.).
Title on description: Welding equipment, accessories, and shop safety.
Title on description: Welding equipment, accessories, and shop safety.
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (301 documents)
example document: Ceramic tile maintenance
example document: Ceramic tile maintenance
|
Heat and cold emergencies
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094837 / 1981-02-27
Date of Publication:
April 10, 1978
Date of Creation:
1978
Title:
Heat and cold emergencies.
Series:
[Emergency medical training] ; program 14
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (13 min.) : sd., col. ; 1/2 in.
Number of similar titles:
2
Similar Title:
Other Title:
Emergency medical training ; program 14
E M T series ; program 14
E M T series ; program 14
Copyright Claimant:
Omnia Corporation
Notes:
Variant form of series on copy: E M T series ; program 14.
Deposit includes description (1 p.)
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Safety and equipment for gas shielded arc welding
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094838 / 1981-02-27
Date of Publication:
November 12, 1979
Date of Creation:
1979
Title:
Safety and equipment for gas shielded arc welding.
Credits:
Produced by Omnia Corporation.
Series:
Welding III ; program 1
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (11 min.) : sd., col. ; 3/4 in.
Number of similar titles:
1
Similar Title:
Other Title:
Welding III ; program 1
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Setting up and padding of the inert-gas-shielded metal-arc welding
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094839 / 1981-02-27
Date of Publication:
April 10, 1979
Date of Creation:
1979
Title:
Setting up and padding of the inert-gas-shielded metal-arc welding.
Credits:
Produced by Omnia Corporation.
Series:
Welding III ; program 2
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (12 min.) : sd., col. ; 3/4 in.
Other Title:
Welding III ; program 2
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Setting up flux-cored wire and running continuous beads
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094840 / 1981-02-27
Date of Publication:
October 9, 1979
Date of Creation:
1979
Title:
Setting up flux-cored wire and running continuous beads.
Credits:
Produced by Omnia Corporation.
Series:
Welding III ; program 5
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (8 min.) : sd., col. ; 3/4 in.
Other Title:
Welding III ; program 5
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Butt joint, T-joint, and lap joint with dual-shielded
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000094844 / 1981-02-27
Date of Publication:
October 12, 1979
Date of Creation:
1979
Title:
Butt joint, T-joint, and lap joint with dual-shielded.
Credits:
Produced by Omnia Corporation.
Series:
Welding III ; lesson 6
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (9 min.) : sd., col. ; 1/2 in.
Other Title:
Welding III ; lesson 6
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Machine keyways on the vertical milling machine
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097745 / 1981-04-07
Date of Publication:
July 27, 1979
Date of Creation:
1979
Title:
Machine keyways on the vertical milling machine.
Credits:
Produced by Omnia Corporation.
Series:
Machine tech IV ; lesson 4
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (V H S) (ca. 15 min.) : sd., col. ; 1/2 in.
Other Title:
Machine tech IV ; lesson 4
Machining keyways on the vertical milling machine (straight and woodruff)
Machining keyways on the vertical milling machine (straight and woodruff)
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.).
Title on description: Machining keyways on the vertical milling machine (straight and woodruff)
Title on description: Machining keyways on the vertical milling machine (straight and woodruff)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Use of the face milling cutter on the horizontal mill
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097755 / 1981-03-25
Date of Publication:
August 10, 1979
Date of Creation:
1979
Title:
Use of the face milling cutter on the horizontal mill.
Application Title:
Use of face milling cutters on the horizontal mill.
Credits:
Produced by Omnia Corporation.
Series:
Machine tech IV ; program 8
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (9 min.) : sd., col. ; 1/2 in.
Other Title:
Machine tech IV ; program 8
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Butt joint, T-joint, lap joint, and outside corner joints in the vertical and overhead position with M. I. G
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097759 / 1981-04-03
Date of Publication:
September 28, 1979
Date of Creation:
1979
Title:
Butt joint, T-joint, lap joint, and outside corner joints in the vertical and overhead position with M. I. G.
Credits:
Produced by Omnia Corporation.
Series:
Welding III ; program 4
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (10 min.) : sd., col. ; 1/2 in.
Other Title:
Welding III ; program 4
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Butt joint, T-joint, lap joint, and outside corner joints in the flat and horizontal position with M. I. G
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097760 / 1981-04-03
Date of Publication:
April 18, 1979
Date of Creation:
1979
Title:
Butt joint, T-joint, lap joint, and outside corner joints in the flat and horizontal position with M. I. G.
Credits:
Produced by Omnia Corporation.
Series:
Welding III ; program 3
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (11 min.) : sd., col. ; 1/2 in.
Other Title:
Welding III ; program 3
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Multi-pass welding with dual-shielded
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097762 / 1981-04-03
Date of Publication:
October 12, 1979
Date of Creation:
1979
Title:
Multi-pass welding with dual-shielded.
Credits:
Produced by Omnia Corporation.
Series:
Welding III ; program 7
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (11 min.) : sd., col. ; 1/2 in.
Other Title:
Welding III ; program 7
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Safety in gas-tungsten arc welding
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097763 / 1981-04-03
Date of Publication:
October 15, 1979
Date of Creation:
1979
Title:
Safety in gas-tungsten arc welding.
Credits:
Produced by Omnia Corporation.
Series:
Welding III ; program 9
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (8 min.) : sd., col. ; 1/2 in.
Other Title:
Welding III ; program 9
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Welding stainless steel with inert-gas tungsten arc
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000097766 / 1981-04-03
Date of Publication:
October 15, 1979
Date of Creation:
1979
Title:
Welding stainless steel with inert-gas tungsten arc.
Credits:
Produced by Omnia Corporation.
Series:
Welding III ; program 13
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (12 min.) : sd., col. ; 1/2 in.
Other Title:
Welding III ; program 13
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Welding mild steel with inert gas tungsten arc
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000099848 / 1981-04-03
Date of Publication:
October 12, 1979
Date of Creation:
1979
Title:
Welding mild steel with inert gas tungsten arc.
Credits:
Produced by Omnia Corporation.
Series:
Welding 3 ; program 12
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (ca. 15 min.) : sd., col. ; 1/2 in.
Number of similar titles:
4
Similar Title:
Other Title:
Welding 3; program 12
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Welding aluminum with the inert gas tungsten arc welding equipment
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000099849 / 1981-04-03
Date of Publication:
October 12, 1979
Date of Creation:
1979
Title:
Welding aluminum with the inert gas tungsten arc welding equipment.
Credits:
Produced by Omnia Corporation.
Series:
Welding 3 ; program 11
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (ca. 15 min.) : sd., col. ; 1/2 in.
Other Title:
Welding 3; program 11
Welding aluminum with inert-gas tungsten arc.
Welding aluminum with inert-gas tungsten arc.
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.).
Title on description: Welding aluminum with inert-gas tungsten arc.
Title on description: Welding aluminum with inert-gas tungsten arc.
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Selection equipment for inert gas tungsten arc welding
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000126928 / 1982-01-20
Date of Publication:
October 15, 1979
Date of Creation:
1979
Title:
Selection equipment for inert gas tungsten arc welding.
Credits:
Produced by Omnia Corporation.
Copyright Note:
C.O. correspondence.
Series:
Welding III ; program 10
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (15 min.) : sd., col. ; 1/2 in.
Other Title:
Welding III ; program 10
Selection of electrode, gas, cups, and filler rod for inert-gas-tungsten arc (TIG) welding
Selection of electrode, gas, cups, and filler rod for inert-gas-tungsten arc (TIG) welding
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.).
Title on description: Selection of electrode, gas, cups, and filler rod for inert-gas-tungsten arc (TIG) welding.
Title on description: Selection of electrode, gas, cups, and filler rod for inert-gas-tungsten arc (TIG) welding.
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Setting up aluminum wire feed and running butt, T, and lap joints
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000126929 / 1982-01-20
Date of Publication:
October 12, 1979
Date of Creation:
1979
Title:
Setting up aluminum wire feed and running butt, T, and lap joints.
Credits:
Produced by Omnia Corporation.
Copyright Note:
C.O. correspondence.
Series:
Welding III ; program 8
Imprint:
[s.l. : s.n.], c1979.
Description:
1 videocassette (Betamax) (16 min.) : sd., col. ; 1/2 in.
Other Title:
Welding III ; program 8
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.).
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Field evaluation and care of the injured athlete
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000129247 / 1982-01-20
Date of Publication:
September 12, 1981
Date of Creation:
1981
Title:
Field evaluation and care of the injured athlete / produced by Omnia Corporation.
Imprint:
[s.l. : s.n.], c1981.
Description:
1 videocassette (VHS) (23 min.) : sd., col. ; 1/2 in.
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Installing furring strips & insulation to concrete walls
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000129249 / 1982-01-20
Date of Publication:
February 20, 1981
Date of Creation:
1981
Title:
Installing furring strips & insulation to concrete walls.
Series:
Handyman
Imprint:
[s.l. : s.n.], c1981.
Description:
1 videocassette (VHS) (7 min.) : sd., col. ; 1/2 in.
Other Title:
Furring & insulating concrete walls
Copyright Claimant:
Omnia Corporation & Webb Publishing Company
Notes:
Deposit includes description (1 p.).
Title on description: Furring & insulating concrete walls.
Title on description: Furring & insulating concrete walls.
Authorship on Application:
Omnia Corporation & Webb Publishing Company, employers for hire.
Names:
Omnia Corporation (301 documents)
example document: Blueprint reading--lines, views, dimensions
Webb Publishing Company (26 documents)
example document: National hog farmer
example document: Blueprint reading--lines, views, dimensions
Webb Publishing Company (26 documents)
example document: National hog farmer
|
Patching walls and ceilings
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000129253 / 1982-01-20
Date of Publication:
February 5, 1981
Date of Creation:
1981
Title:
Patching walls and ceilings / produced by Handyman.
Credits:
Produced by Omnia Corporation & Webb Publishing Company (on description)
Series:
Handyman series
Imprint:
[s.l. : s.n.], c1981.
Description:
1 videocassette (VHS) (6 min.) : sd., col. ; 1/2 in.
Other Title:
Patching walls & cracks.
Copyright Claimant:
Omnia Corporation & Webb Publishing Company
Copyright Notice:
notice: The Webb Company and Omnia Corporation
Notes:
Deposit includes description (1 p.).
Title on description: Patching walls & cracks.
Title on description: Patching walls & cracks.
Authorship on Application:
Omnia Corporation & Webb Publishing Company, employers for hire.
Names:
Handyman.
Omnia Corporation (301 documents)
example document: Blueprint reading for welders produced by Omnia Corporation
Webb Publishing Company (26 documents)
example document: National hog farmer
Webb Company (45 documents)
example document: Farm industry news Sunbelt
Omnia Corporation (301 documents)
example document: Blueprint reading for welders produced by Omnia Corporation
Webb Publishing Company (26 documents)
example document: National hog farmer
Webb Company (45 documents)
example document: Farm industry news Sunbelt
|
Taper turning
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000129502 / 1982-02-02
Date of Publication:
April 30, 1978
Date of Creation:
1978
Title:
Taper turning.
Series:
Machine technology II ; lesson 12
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (20 min.) : sd., col. ; 1/2 in.
Number of similar titles:
7
Similar Title:
Other Title:
Machine technology II ; lesson 12
Taper turning on the lathe
Taper turning on the lathe
Copyright Claimant:
Omnia Corporation
Notes:
Title on housing: Taper turning on the lathe.
Deposit includes description (1 p.)
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Performer:
Presented by DoAll.
Names:
DoAll (5 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation (301 documents)
example document: Hand hacksaws and files
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation (301 documents)
example document: Hand hacksaws and files
Installing wallboard
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000129504 / 1982-01-20
Date of Publication:
February 20, 1981
Date of Creation:
1981
Title:
Installing wallboard / produced by Handyman.
Imprint:
[s.l. : s.n.], c1981.
Description:
1 videocassette (Betamax) (7 min.) : sd., col. ; 1/2 in.
Number of similar titles:
1
Similar Title:
Other Title:
Wallboard Installation
Copyright Claimant:
Omnia Corporation & Webb Publishing Company
Notes:
Title on housing & container: Wallboard Installation.
Deposit includes description (1 p.)
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation & Webb Publishing Company, employers for hire.
Names:
Handyman (6 documents)
example document: Second hand love
Omnia Corporation (301 documents)
example document: Using the tool post grinder on the lathe
Webb Publishing Company (26 documents)
example document: Aircraft bluebook--price digest & 274 other titles. (Part 002 of 002)
example document: Second hand love
Omnia Corporation (301 documents)
example document: Using the tool post grinder on the lathe
Webb Publishing Company (26 documents)
example document: Aircraft bluebook--price digest & 274 other titles. (Part 002 of 002)
Measuring tools
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000129506 / 1982-01-20
Date of Publication:
September 22, 1978
Date of Creation:
1978
Title:
Measuring tools.
Application Title:
The Use of measuring tools in machine technology.
Series:
Machine technology I ; lesson 3
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (11 min.) : sd., col. ; 1/2 in.
Number of similar titles:
9
Similar Title:
Other Title:
Machine technology I ; lesson 3
Measuring devices
Measuring devices
Copyright Claimant:
Omnia Corporation
Notes:
Title on housing: Measuring devices.
Deposit includes description (1 p.)
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Installing wallcoverings
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000129508 / 1982-01-20
Date of Publication:
February 5, 1981
Date of Creation:
1981
Title:
Installing wallcoverings / produced by Handyman.
Imprint:
[s.l. : s.n.], c1981.
Description:
1 videocassette (Betamax) (10 min.) : sd., col. ; 1/2 in.
Number of similar titles:
1
Other Title:
Wallpapering
Copyright Claimant:
Omnia Corporation & Webb Publishing Company
Notes:
Title on housing: Wallpapering.
Deposit includes description (1 p.)
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation & Webb Publishing Company, employers for hire.
Names:
Handyman (6 documents)
example document: Shake it, don't break it
Omnia Corporation (301 documents)
example document: Flat and horizontal butt welds with filler rod
Webb Publishing Company (26 documents)
example document: National hog farmer
example document: Shake it, don't break it
Omnia Corporation (301 documents)
example document: Flat and horizontal butt welds with filler rod
Webb Publishing Company (26 documents)
example document: National hog farmer
Turning a radius
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000129509 / 1982-02-02
Date of Publication:
April 20, 1978
Date of Creation:
1978
Title:
Turning a radius.
Series:
Machine technology II ; lesson 11
Imprint:
[s.l. : s.n.], c1978.
Description:
1 videocassette (Betamax) (16 min.) : sd., col. ; 1/2 in.
Number of similar titles:
6
Other Title:
Machine technology II ; lesson 11
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Performer:
Presented by DoAll.
Names:
DoAll (5 documents)
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation (301 documents)
example document: Flat and horizontal butt welds with filler rod
example document: Identification of parts and operation of the vertical milling machine
Omnia Corporation (301 documents)
example document: Flat and horizontal butt welds with filler rod
Emergency handling of drowning accidents
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000132010 / 1982-01-20
Date of Publication:
May 18, 1978
Date of Creation:
1978
Title:
Emergency handling of drowning accidents / produced by Omnia Corporation in cooperation with G. Patrick Lilja.
Series:
Emergency medical training series ; program no. 16
Imprint:
Minneapolis : Distributed by Omnia, c1978.
Description:
1 videocassette (13 min.) : sd., col. ; 3/4 in.
Number of similar titles:
1
Other Title:
Emergency medical training series ; program no. 16
Copyright Claimant:
Omnia Corporation
Notes:
Deposit includes description (1 p.)
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
G. Patrick Lilja (1 documents)
example document: Emergency management of abdominal trauma
Omnia Corporation (301 documents)
example document: Hand tools
example document: Emergency management of abdominal trauma
Omnia Corporation (301 documents)
example document: Hand tools
Joint designs and preparation
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000232382 / 1984-09-28
Date of Publication:
August 24, 1982
Date of Creation:
1982
Title:
Joint designs and preparation / produced by Omnia Corporation.
Series:
Pipewelding series ; program no. 2
Imprint:
[Edina, MN] : The Corporation, c1982.
Description:
1 videocassette (Beta) (12 min.) : sd., col. ; 1/2 in.
Number of similar titles:
2
Similar Title:
Other Title:
Pipewelding series ; program no. 2
Copyright Claimant:
Omnia Corporation
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Aluminum pipe welding
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000232383 / 1984-09-28
Date of Publication:
March 1, 1983
Date of Creation:
1983
Date in Notice:
notice: 1982
Title:
Aluminum pipe welding / produced by Omnia Corporation.
Series:
Pipewelding series ; program no. 4
Imprint:
[Edina, MN] : The Corporation, c1982.
Description:
1 videocassette (Beta) (21 min.) : sd., col. ; 1/2 in.
Number of similar titles:
6
Similar Title:
Other Title:
Pipewelding series ; program no. 4
Copyright Claimant:
Omnia Corporation
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Omnia Corporation (301 documents)
example document: Vertical and overhead butt welds with filler rod
example document: Vertical and overhead butt welds with filler rod
Carbon steel pipe welding
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000232384 / 1984-09-28
Date of Publication:
April 4, 1983
Date of Creation:
1983
Title:
Carbon steel pipe welding.
Series:
Pipewelding series ; program no. 3
Imprint:
[Edina, MN] : Omnia Corp., c1983.
Description:
1 videocassette (Beta) (18 min.) : sd., col. ; 1/2 in.
Number of similar titles:
2
Other Title:
Pipewelding series ; program no. 3
Copyright Claimant:
Omnia Corporation
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
Stack operations & subrouting
Type of Work:
Motion picture or filmstrip
Registration Number / Date:
PA0000240625 / 1984-10-23
Date of Publication:
July 26, 1983
Date of Creation:
1983
Title:
Stack operations & subrouting / produced by Omnia Corporation.
Copyright Note:
C.O. correspondence.
Series:
Microprocessors ; unit 6
Imprint:
[s.l.] : Heath Co., c1983.
Description:
1 videocassette (Beta) (16 min.) : sd., col. ; 1/2 in.
Other Title:
Microprocessors ; unit 6
6800 MPU stack operation/subroutines
Microprocessor series ; lesson no. 7
6800 MPU stack operation/subroutines
Microprocessor series ; lesson no. 7
Copyright Claimant:
Omnia Corporation
Notes:
Title on description: 6800 MPU stack operation/subroutines; series title on description: Microprocessor series ; lesson no. 7.
Authorship on Application:
Omnia Corporation, employer for hire.
Names:
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible. Multiple persons can share the same name.