Companies holding boiler and pressure vessel certificates of authorization for use of code symbol stamps part 2
Addenda to Controls and safety devices for automatically fired boilers
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0001464543 / 1984-12-05
Date of Publication:
November 1, 1984
Date of Creation:
1984
Title:
Addenda to Controls and safety devices for automatically fired boilers : ANSI/ASME CSD-1a-1984 : an American national standard / sponsored by the American Society of Mechanical Engineers.
Basis of Claim:
New Matter: "new and rev. material throughout."
Previous Registration:
Prev. reg. 1982.
Imprint:
New York : The Society, 1984.
Description:
1 v.
Other Title:
Controls and safety devices for automatically fired boilers
Copyright Claimant:
the American Society of Mechanical Engineers
Names:
American Society of Mechanical Engineers (7492 documents)
example document: ASME boiler and pressure vessel code
example document: ASME boiler and pressure vessel code
|
Managing engineering data
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002382565 / 1988-08-24
Date of Publication:
July 29, 1988
Date of Creation:
1988
Title:
Managing engineering data : emerging issues / sponsored by A S M E/C O E Data Base Committee, Computers in Engineering Division, A S M E / edited by R. E. Fulton.
Imprint:
New York : American Society of Mechanical Engineers, c1988.
Description:
150 p.
Number of similar titles:
1
Similar Title:
Variant title:
Managing engineering data : emerging issues
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Performer:
Presented at the 1987 A S M E International Computers in Engineering Conference and Exhibition, July 31-Aug. 4, 1988, San Francisco, California.
Names:
R. E. Fulton (3 documents)
example document: Managing engineering data
ASME International Computers in Engineering Conference and Exhibition, San Francisco, 1988
American Society of Mechanical Engineers (7492 documents)
example document: ASME boiler and pressure vessel code
American Society of Mechanical Engineers. Computers in Engineering Division. A S M E/C O E Data Base Committee (1 documents)
example document: Managing engineering data
ASME/COE Data Base Committee, Computers in Engineering Division, A S M E. (1 documents)
example document: Managing engineering data
example document: Managing engineering data
|
ASME International Computers in Engineering Conference and Exhibition, San Francisco, 1988
|
American Society of Mechanical Engineers (7492 documents)
example document: ASME boiler and pressure vessel code
American Society of Mechanical Engineers. Computers in Engineering Division. A S M E/C O E Data Base Committee (1 documents)
example document: Managing engineering data
ASME/COE Data Base Committee, Computers in Engineering Division, A S M E. (1 documents)
example document: Managing engineering data
1988 A S M E Cogen-Turbo
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002419154 / 1988-10-12
Date of Publication:
August 26, 1988
Date of Creation:
1988
Title:
1988 A S M E Cogen-Turbo : 2nd International Symposium on Turbomachinery, Combined-Cycle Technologies and Cogeneration / edited by G. K. Serovy, T. H. Fransson ; sponsored by the A S M E International Gas Turbine Institute.
Series:
IGTI;v.3
Imprint:
New York : ASME, c1988.
Description:
396 p.
Other Title:
I G T I ;v.3
Copyright Claimant:
the American Society of Mechanical Engineers
Notes:
Conference held in Montreux, Switzerland, Aug. 30-Sept. 1, 1988.
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
T. H. Fransson
G. K. Serovy
American Society of Mechanical Engineers. International Gas Turbine Institute
International Symposium on Turbomachinery, Combined-Cycle Technologies and ..., 2nd, Montreux, Switzerland, 1988
American Society of Mechanical Engineers (7492 documents)
example document: Interdisciplinary issues in materials processing and manufacturing
ASME International Gas Turbine Institute.
Turbomachinery, Combined-Cycle Technologies and Cogeneration, International Symposium on.
ASME Cogen-Turbo, 1988.
|
G. K. Serovy
|
American Society of Mechanical Engineers. International Gas Turbine Institute
|
International Symposium on Turbomachinery, Combined-Cycle Technologies and ..., 2nd, Montreux, Switzerland, 1988
American Society of Mechanical Engineers (7492 documents)
example document: Interdisciplinary issues in materials processing and manufacturing
ASME International Gas Turbine Institute.
Turbomachinery, Combined-Cycle Technologies and Cogeneration, International Symposium on.
ASME Cogen-Turbo, 1988.
1988 international design criteria of boilers and pressure vessels
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002419155 / 1988-10-12
Date of Publication:
September 7, 1988
Date of Creation:
1988
Title:
1988 international design criteria of boilers and pressure vessels : papers presented at the Sixth International Conference on Pressure Vessel Technology, Beijing, People's Republic of China, September 11-15, 1988 / sponsored by the Pressure Vessels and Piping Division, A S M E.
Series:
PVP;v. 152
Imprint:
New York : ASME, c1988.
Description:
137 p.
Other Title:
International design criteria of boilers and pressure vessels
P V P ; v. 152
P V P ; v. 152
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
International Conference on Pressure Vessel Technology, 6th, Beijing, China, 1988
American Society of Mechanical Engineers. Pressure Vessel and Piping Division. (6 documents)
example document: Use of computer in managing material property data
American Society of Mechanical Engineers (7492 documents)
example document: Dynamics and control of thermofluid processes and systems
American Society of Mechanical Engineers. Pressure Vessel and Piping Division. (6 documents)
example document: Use of computer in managing material property data
American Society of Mechanical Engineers (7492 documents)
example document: Dynamics and control of thermofluid processes and systems
Research needs in dynamic systems and control
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002419281 / 1988-10-12
Date of Publication:
September 2, 1988
Date of Creation:
1988
Title:
Research needs in dynamic systems and control : v. 2, Acoustics and noise control / prepared by the Steering Committee on Acoustics and Noise Control ; edited by Adnan Akay, K. Uno Ingard, C. Dan Mote.
Imprint:
New York : American Society of Mechanical Engineers, 1988.
Description:
37 p.
Number of similar titles:
4
Variant title:
Research needs in dynamic systems and control : v. 2
Other Title:
Acoustics and noise control
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
C. Dan Mote
K. Uno Ingard
Adnan Akay
American Society of Mechanical Engineers. Steering Committee on Acoustics and Noise Control
American Society of Mechanical Engineers (7492 documents)
example document: Seismic engineering, 1992
Steering Committee on Acoustics and Noise Control
K. Uno Ingard
Adnan Akay
American Society of Mechanical Engineers. Steering Committee on Acoustics and Noise Control
American Society of Mechanical Engineers (7492 documents)
example document: Seismic engineering, 1992
Steering Committee on Acoustics and Noise Control
Research needs in dynamic systems and control
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002419285 / 1988-10-12
Date of Publication:
September 2, 1988
Date of Creation:
1988
Title:
Research needs in dynamic systems and control : v. 3, Control of mechanical systems / prepared by the Steering Committee on Control of Mechanical Systems ; edited by David N. Wormley.
Imprint:
New York : American Society of Mechanical Engineers, c1988.
Description:
27 p.
Number of similar titles:
4
Variant title:
Research needs in dynamic systems and control : v. 3
Other Title:
Control of mechanical systems
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
David N. Wormley (1 documents)
example document: System dynamics
American Society of Mechanical Engineers (7492 documents)
example document: Structural dynamics and vibrations, 1993
American Society of Mechanical Engineers. Steering Committee on Control of Mechanical Systems
example document: System dynamics
American Society of Mechanical Engineers (7492 documents)
example document: Structural dynamics and vibrations, 1993
American Society of Mechanical Engineers. Steering Committee on Control of Mechanical Systems
Fuel and sorbent preparation for fluidized bed boilers
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002421533 / 1988-10-12
Date of Publication:
September 29, 1988
Date of Creation:
1988
Title:
Fuel and sorbent preparation for fluidized bed boilers : presented at the 1988 Joint Power Generation Conference, Philadelphia, Pennsylvania, September 25-29, 1988 / sponsored by the Fuels Handling, Transportation, and Storage Technical Committee of the Fuels and Combustion Technologies Division, A S M E ; edited by Timothy Nechvatal.
Series:
FACT;v.3
Imprint:
New York : ASME, c1988.
Description:
41 p.
Other Title:
F A C T ;v.3
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
Timothy Nechvatal (2 documents)
example document: Fuel strategies for conventional and unconventional fuels
American Society of Mechanical Engineers. Fuels and Combustion Technologies Division. Fuels Handling ... Committee
Joint Power Generation Conference, Philadelphia, 1988
American Society of Mechanical Engineers (7492 documents)
example document: ASME boiler and pressure vessel code, an American national standard
Fuels Handling, Transportation, and Storage Technical Committee of the Fuels ... Division, A S M E
example document: Fuel strategies for conventional and unconventional fuels
American Society of Mechanical Engineers. Fuels and Combustion Technologies Division. Fuels Handling ... Committee
Joint Power Generation Conference, Philadelphia, 1988
American Society of Mechanical Engineers (7492 documents)
example document: ASME boiler and pressure vessel code, an American national standard
Fuels Handling, Transportation, and Storage Technical Committee of the Fuels ... Division, A S M E
Steam turbines in power generation
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002421534 / 1988-10-12
Date of Publication:
September 23, 1988
Date of Creation:
1988
Title:
Steam turbines in power generation : presented at the 1988 Joint Power Generation Conference, Philadelphia, Pennsylvania, September 25-29, 1988 / sponsored by the Power Division, A S M E ; edited by I. A. Diaz-Tous.
Series:
PWR;v.3
Imprint:
New York : ASME, c1988.
Description:
231 p.
Other Title:
P W R ; v.3
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
I. A. Diaz-Tous
I. A. Diaz Tous
American Society of Mechanical Engineers. Power Division (29 documents)
example document: Cogeneration power plants--combined cycle design, operation, control, and unit auxiliaries
Joint Power Generation Conference, Philadelphia, 1988
American Society of Mechanical Engineers (7492 documents)
example document: Flow-induced vibrations--1987
Power Division, A S M E (14 documents)
example document: Powering up for the recovery
I. A. Diaz Tous
American Society of Mechanical Engineers. Power Division (29 documents)
example document: Cogeneration power plants--combined cycle design, operation, control, and unit auxiliaries
|
Joint Power Generation Conference, Philadelphia, 1988
American Society of Mechanical Engineers (7492 documents)
example document: Flow-induced vibrations--1987
Power Division, A S M E (14 documents)
example document: Powering up for the recovery
Research needs in dynamic systems and control
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002421535 / 1988-10-12
Date of Publication:
September 2, 1988
Date of Creation:
1988
Title:
Research needs in dynamic systems and control : v. 5, Nonlinear dynamics / prepared by the Steering Committee on Nonlinear Dynamics ; edited by A. H. Nayfeh, D. T. Mook.
Imprint:
New York : ASME, c1988.
Description:
23 p.
Number of similar titles:
4
Variant title:
Research needs in dynamic systems and control : v. 5
Other Title:
Nonlinear dynamics
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
D. T. Mook
A. H. Nayfeh
American Society of Mechanical Engineers. Steering Committee on Nonlinear Dynamics
American Society of Mechanical Engineers (7492 documents)
example document: 1990 advances in bioengineering
Steering Committee on Nonlinear Dynamics
A. H. Nayfeh
American Society of Mechanical Engineers. Steering Committee on Nonlinear Dynamics
American Society of Mechanical Engineers (7492 documents)
example document: 1990 advances in bioengineering
Steering Committee on Nonlinear Dynamics
Continuous emission monitoring systems for power plants
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002421536 / 1988-10-12
Date of Publication:
September 23, 1988
Date of Creation:
1988
Title:
Continuous emission monitoring systems for power plants : the state-of-the-art : presented at the 1988 Joint Power Generation Conference, Philadelphia, Pennsylvania, September 25-29, 1988 / sponsored by the Measurements and Instrumentation Committee of the Environmental Control Division, A S M E ; edited by J. A. Bamberger.
Series:
EC;v.1
Imprint:
New York : ASME, c1988.
Description:
44 p.
Other Title:
E C ; v. 1
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
J. A. Bamberger
American Society of Mechanical Engineers. Environmental Control Division. Measurements and Instrumentation Committee
Joint Power Generation Conference, Philadelphia, 1988
American Society of Mechanical Engineers (7492 documents)
example document: Companies holding boiler and pressure vessel certificates of authorization for use of code symbol stamps and testing laboratories holding certificates of acceptance for capacity certification of pressure relief devices
Measurements and Instrumentation Committee of the Environmental Control Division, A S M E
American Society of Mechanical Engineers. Environmental Control Division. Measurements and Instrumentation Committee
Joint Power Generation Conference, Philadelphia, 1988
American Society of Mechanical Engineers (7492 documents)
example document: Companies holding boiler and pressure vessel certificates of authorization for use of code symbol stamps and testing laboratories holding certificates of acceptance for capacity certification of pressure relief devices
Measurements and Instrumentation Committee of the Environmental Control Division, A S M E
Co-combustion
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002421537 / 1988-10-12
Date of Publication:
September 23, 1988
Date of Creation:
1988
Title:
Co-combustion : presented at the 1988 Joint Power Generation Conference, Philadelphia, Pennsylvania, September 25-29, 1988 / sponsored by the Fuels Processing and Alternative Fuels Subcommittee of the Fuels and Combustion Technologies Division, A S M E ; edited by Alex E. S. Green.
Series:
FACT;v.4
Imprint:
New York : ASME, c1988.
Description:
67 p.
Other Title:
F A C T ;v.4
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
Alex E. S. Green (5 documents)
example document: Solid fuel conversion for the transportation sector
American Society of Mechanical Engineers. Fuels and Combustion Technologies Division. Fuels ... Subcommittee
Joint Power Generation Conference, Philadelphia, 1988
American Society of Mechanical Engineers (7492 documents)
example document: Design and analysis of composite material vessels
Fuels Processing and Alternative Fuels Subcommittee of the Fuels ... Division, A S M E
example document: Solid fuel conversion for the transportation sector
|
American Society of Mechanical Engineers. Fuels and Combustion Technologies Division. Fuels ... Subcommittee
Joint Power Generation Conference, Philadelphia, 1988
American Society of Mechanical Engineers (7492 documents)
example document: Design and analysis of composite material vessels
Fuels Processing and Alternative Fuels Subcommittee of the Fuels ... Division, A S M E
Advances in mechanical behavior and properties evaluations
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002454942 / 1988-12-13
Date of Publication:
November 28, 1988
Date of Creation:
1988
Title:
Advances in mechanical behavior and properties evaluations : presented at the winter annual meeting of the American Society of Mechanical Engineers, Chicago, Illinois, November 27-December 2, 1988 / sponsored by the Materials Division, A S M E ; edited by A. Saigal, A. A. Tseng.
Series:
MD;v.7
Imprint:
New York : American Society of Mechanical Engineers, c1988.
Description:
132 p.
Other Title:
M D ; v. 7
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
A. A. Tseng (3 documents)
example document: New directions in the nondestructive evaluation of advanced materials
A. Saigal
American Society of Mechanical Engineers. Materials Division (45 documents)
example document: Measurements of the impacts of materials substitution
American Society of Mechanical Engineers (7492 documents)
example document: Advances in Grid Generation
Materials Division, A S M E. (15 documents)
example document: ASME International Conference on Advances in Life Prediction Methods
example document: New directions in the nondestructive evaluation of advanced materials
A. Saigal
|
American Society of Mechanical Engineers. Materials Division (45 documents)
example document: Measurements of the impacts of materials substitution
|
American Society of Mechanical Engineers (7492 documents)
example document: Advances in Grid Generation
Materials Division, A S M E. (15 documents)
example document: ASME International Conference on Advances in Life Prediction Methods
|
Education for the changing pace of technology
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002454944 / 1988-12-13
Date of Publication:
November 28, 1988
Date of Creation:
1988
Title:
Education for the changing pace of technology : presented at the winter annual meeting of the American Society of Mechanical Engineers, Chicago, Illinois, November 27-December 2, 1988 / sponsored by the Technology and Society Division, A S M E ; edited by T. P. Torda.
Series:
TS;v.1
Imprint:
New York : American Society of Mechanical Engineers, c1988.
Description:
33 p.
Other Title:
T S ; v. 1
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
T. P. Torda
American Society of Mechanical Engineers. Technology and Society Division
American Society of Mechanical Engineers (7492 documents)
example document: The proceedings of the 30th 1995 National Heat Transfer Conference
Technology and Society Division, A S M E.
American Society of Mechanical Engineers. Technology and Society Division
American Society of Mechanical Engineers (7492 documents)
example document: The proceedings of the 30th 1995 National Heat Transfer Conference
Technology and Society Division, A S M E.
Materials in manufacturing processes
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002464964 / 1988-12-13
Date of Publication:
November 28, 1988
Date of Creation:
1988
Title:
Materials in manufacturing processes : presented at the winter annual meeting of the American Society of Mechanical Engineers, Chicago, Illinois, November 27-December 2, 1988 / sponsored by the Materials Division, A S M E ; edited by B. V. Kiefer, J. J. Gavigan, C. M. Ni.
Series:
MD;v.8
Imprint:
New York : American Society of Mechanical Engineers, c1988.
Description:
145 p.
Other Title:
M D ; v. 8
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
collective work: the American Society of Mechanical Engineers, employer for hire.
Names:
C. M. Ni (1 documents)
example document: Symposium on Vehicle Crashworthiness Including Impact Biomechanics
J. J. Gavigan
B. V. Kiefer
American Society of Mechanical Engineers. Materials Division (45 documents)
example document: Processing of polymers and polymeric composites
American Society of Mechanical Engineers (7492 documents)
example document: Technical economics, synfuels, and coal energy symposium
Materials Division, A S M E. (15 documents)
example document: ASME International Conference on Advances in Life Prediction Methods
example document: Symposium on Vehicle Crashworthiness Including Impact Biomechanics
J. J. Gavigan
B. V. Kiefer
American Society of Mechanical Engineers. Materials Division (45 documents)
example document: Processing of polymers and polymeric composites
American Society of Mechanical Engineers (7492 documents)
example document: Technical economics, synfuels, and coal energy symposium
Materials Division, A S M E. (15 documents)
example document: ASME International Conference on Advances in Life Prediction Methods
Research needs in dynamic systems and control
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002466926 / 1988-12-13
Date of Publication:
November 10, 1988
Date of Creation:
1988
Title:
Research needs in dynamic systems and control : v. 1, strategic research initiatives and opportunities / prepared by the Steering Committee on Dynamic Systems and Control ; edited by Herbert H. Richardson, Clayton T. Nelson.
Imprint:
New York : American Society of Mechanical Engineers, 1988.
Description:
58 p.
Number of similar titles:
4
Variant title:
Research needs in dynamic systems and control : v. 1
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
collective work: the American Society of Mechnical Engineers, employer for hire.
Names:
Clayton T. Nelson
Herbert H. Richardson (1 documents)
example document: Introduction to system dynamics. By J. Lowen Shearer, Arthur T. Murphy & Herbert H. Richardson
American Society of Mechanical Engineers. Steering Committee on Dynamic Systems and Control
American Society of Mechanical Engineers (7492 documents)
example document: 2001 ASME boiler & pressure vessel code, an international code
Steering Committee on Dynamic Systems and Control.
Herbert H. Richardson (1 documents)
example document: Introduction to system dynamics. By J. Lowen Shearer, Arthur T. Murphy & Herbert H. Richardson
American Society of Mechanical Engineers. Steering Committee on Dynamic Systems and Control
American Society of Mechanical Engineers (7492 documents)
example document: 2001 ASME boiler & pressure vessel code, an international code
Steering Committee on Dynamic Systems and Control.
1988 International Symposium on Flow-Induced Vibration and Noise
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002477770 / 1989-01-12
Date of Publication:
November 28, 1988
Date of Creation:
1988
Title:
1988 International Symposium on Flow-Induced Vibration and Noise : v. 7, Nonlinear interaction effects and chaotic motions / edited by M. M. Reischman, M. P. Paidoussis, R. J. Hansen.
Imprint:
New York : American Society of Mechanical Engineers, c1988.
Description:
181 p.
Number of similar titles:
6
Variant title:
1988 International Symposium on Flow-Induced Vibration and Noise : v. 7
Other Title:
Nonlinear interaction effects and chaotic motions
Copyright Claimant:
the American Society of Mechanical Engineers
Notes:
Vol. 7 sponsored by the Noise Control and Acoustics Division, A S M E.
Symposium co-sponsored by the American Society of Mechanical Engineers, the Canadian Society for Mechanical Engineering, the Institute of Mechanical Engineers, the International Association for Hydraulic Research.
Symposium co-sponsored by the American Society of Mechanical Engineers, the Canadian Society for Mechanical Engineering, the Institute of Mechanical Engineers, the International Association for Hydraulic Research.
Authorship on Application:
collective work: the American Society of Mechanical Engineers, employer for hire.
Performer:
Presented at the winter annual meeting of the American Society of Mechanical Engineers, Chicago, Nov. 27-Dec. 2, 1988.
Names:
Michael P. Paidoussis (13 documents)
example document: Symposium on Flow-Induced Vibrations
R. J. Hansen
M. M. Reischman
International Symposium on Flow-Induced Vibration and Noise, Chicago, 1988 (6 documents)
example document: 1988 International Symposium on Flow-Induced Vibration and Noise
American Society of Mechanical Engineers. Noise Control and Acoustics Division (13 documents)
example document: 1988 International Symposium on Flow-Induced Vibration and Noise
International Association for Hydraulic Research (15 documents)
example document: Finite elements in water resources
Institute of Mechanical Engineers (7 documents)
example document: 1988 International Symposium on Flow-Induced Vibration and Noise
Canadian Society for Mechanical Engineering (10 documents)
example document: 1988 International Symposium on Flow-Induced Vibration and Noise
American Society of Mechanical Engineers (7492 documents)
example document: Companies holding boiler and pressure vessel certificates of authorization for use of code symbol stamps and testing laboratories holding certificates of acceptance for capacity certification of pressure relief devices
example document: Symposium on Flow-Induced Vibrations
|
R. J. Hansen
M. M. Reischman
International Symposium on Flow-Induced Vibration and Noise, Chicago, 1988 (6 documents)
example document: 1988 International Symposium on Flow-Induced Vibration and Noise
American Society of Mechanical Engineers. Noise Control and Acoustics Division (13 documents)
example document: 1988 International Symposium on Flow-Induced Vibration and Noise
|
International Association for Hydraulic Research (15 documents)
example document: Finite elements in water resources
|
Institute of Mechanical Engineers (7 documents)
example document: 1988 International Symposium on Flow-Induced Vibration and Noise
Canadian Society for Mechanical Engineering (10 documents)
example document: 1988 International Symposium on Flow-Induced Vibration and Noise
|
American Society of Mechanical Engineers (7492 documents)
example document: Companies holding boiler and pressure vessel certificates of authorization for use of code symbol stamps and testing laboratories holding certificates of acceptance for capacity certification of pressure relief devices
Computational methods in bioengineering
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002477775 / 1989-01-12
Date of Publication:
November 28, 1988
Date of Creation:
1988
Title:
Computational methods in bioengineering / edited by R. L. Spilker, B. R. Simon.
Imprint:
New York : American Society of Mechanical Engineers, c1988.
Description:
380 p.
Copyright Claimant:
the American Society of Mechanical Engineers
Notes:
Sponsored by the Bioengineering Division, A S M E.
Authorship on Application:
collective work: the American Society of Mechanical Engineers, employer for hire.
Performer:
Presented at the winter annual meeting of the American Society of Mechanical Engineers, Chicago, Nov. 27-Dec. 2, 1988.
Names:
B. R. Simon
R. L. Spilker (4 documents)
example document: Hybrid and mixed finite element methods
American Society of Mechanical Engineers (7492 documents)
example document: Individual papers in fluids engineering, 1995
American Society of Mechanical Engineers. Bioengineering Division (36 documents)
example document: Hyperbaric diving systems and thermal protection
R. L. Spilker (4 documents)
example document: Hybrid and mixed finite element methods
|
American Society of Mechanical Engineers (7492 documents)
example document: Individual papers in fluids engineering, 1995
American Society of Mechanical Engineers. Bioengineering Division (36 documents)
example document: Hyperbaric diving systems and thermal protection
|
Fatigue initiation, propagation, and analysis for code construction
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002487248 / 1988-12-13
Date of Publication:
November 28, 1988
Date of Creation:
1988
Title:
Fatigue initiation, propagation, and analysis for code construction : M P C v. 29 : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Chicago, Illinois, November 27-December 2, 1988 / sponsored by the Materials Properties Council, Inc., the Presure Vessel Research Committee, W R C ; edited by M. Prager.
Imprint:
New York : American Society of Mechanical Engineers, c1988.
Description:
195 p.
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
collective work: the American Society of Mechanical Engineers, employer for hire.
Names:
M. Prager (4 documents)
example document: Improved technology for critical bolting applications
WRC. Pressure Vessel Research Committee (1 documents)
example document: NDE reliability through round robin testing
American Society of Mechanical Engineers, Chicago, 1988 (2 documents)
example document: Large-scale interaction problems
American Society of Mechanical Engineers (7492 documents)
example document: Jets and cavities
Materials Properties Council, Inc. (3 documents)
example document: Understanding variability in creep and rupture behavior
Pressure Vessel Research Committee, W R C. (1 documents)
example document: NDE reliability through round robin testing
example document: Improved technology for critical bolting applications
|
WRC. Pressure Vessel Research Committee (1 documents)
example document: NDE reliability through round robin testing
American Society of Mechanical Engineers, Chicago, 1988 (2 documents)
example document: Large-scale interaction problems
American Society of Mechanical Engineers (7492 documents)
example document: Jets and cavities
Materials Properties Council, Inc. (3 documents)
example document: Understanding variability in creep and rupture behavior
|
Pressure Vessel Research Committee, W R C. (1 documents)
example document: NDE reliability through round robin testing
Railroad journal roller bearing failure and detection
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002495141 / 1989-01-23
Date of Publication:
November 23, 1988
Date of Creation:
1988
Title:
Railroad journal roller bearing failure and detection : presented at the winter annual meeting of the American Society of Mechanical Engineers, Boston, Massachusetts, December 16, 1987 : RTD v. 1 / sponsored by the Railroad Transportation Division, A S M E / edited by G. J. Moyar, S. K. Punwani.
Imprint:
New York : ASME, c1988.
Description:
126 p.
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
collective work: the American Society of Mechanical Engineers, employer for hire.
Names:
S. K. Punwani (2 documents)
example document: Transportation
G. J. Moyar
John Punwani (1 documents)
example document: Proceedings of the 2002 ASME/IEEE joint railroad conference, April 23-25,2002, Washington, DC
American Society of Mechanical Engineers. Railroad Transportation Division
American Society of Mechanical Engineers (7492 documents)
example document: Proceedings of the 1995 design engineering technical conferences
Railroad Transportation Division, A S M E.
example document: Transportation
|
G. J. Moyar
|
John Punwani (1 documents)
example document: Proceedings of the 2002 ASME/IEEE joint railroad conference, April 23-25,2002, Washington, DC
American Society of Mechanical Engineers. Railroad Transportation Division
American Society of Mechanical Engineers (7492 documents)
example document: Proceedings of the 1995 design engineering technical conferences
Railroad Transportation Division, A S M E.
Recent advances in the macro- and micro-mechanics of composite materials structures
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002495142 / 1989-01-23
Date of Publication:
November 23, 1988
Date of Creation:
1988
Title:
Recent advances in the macro- and micro-mechanics of composite materials structures : AD vol. 13 : presented at the winter annual meeting of the American Society of Mechanical Engineers, Chicago, Illinois, November 27-December 2, 1988 / sponsored by the A S M E Aerospace Division ; edited by D. Hui, J. R. Vinson.
Imprint:
New York : ASME, c1988.
Description:
259 p.
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
collective work: the American Society of Mechanical Engineers, employer for hire.
Names:
Jack R. Vinson (6 documents)
example document: Recent advances in composites in the United States and Japan
David Hui (8 documents)
example document: Composite materials for PVP applications
American Society of Mechanical Engineers. Aerospace Division (30 documents)
example document: Damage and oxidation protection in high temperature composites
American Society of Mechanical Engineers (7492 documents)
example document: Nuclear power plant air-cleaning units and components
ASME Aerospace Division.
example document: Recent advances in composites in the United States and Japan
|
David Hui (8 documents)
example document: Composite materials for PVP applications
|
American Society of Mechanical Engineers. Aerospace Division (30 documents)
example document: Damage and oxidation protection in high temperature composites
|
American Society of Mechanical Engineers (7492 documents)
example document: Nuclear power plant air-cleaning units and components
ASME Aerospace Division.
|
Advances in adhesively bonded joints
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002495143 / 1989-01-23
Date of Publication:
November 23, 1988
Date of Creation:
1988
Title:
Advances in adhesively bonded joints : presented at the winter annual meeting of the American Society of Mechanical Engineers, Chicago, Illinois, November 27-December 2, 1988 : MD v. 6 / sponsored by the Materials Division, A S M E ; edited by S. Mall, K. M. Liechti, J. R. Vinson.
Imprint:
New York : ASME, c1988.
Description:
133 p.
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
collective work: the American Society of Mechanical Engineers, employer for hire.
Names:
J. R. Vinson (3 documents)
example document: Emerging technologies in aerospace structures, design, structural dynamics, and materials
K. M. Liechti
S. Mall
American Society of Mechanical Engineers. Materials Division (45 documents)
example document: New directions in the nondestructive evaluation of advanced materials
American Society of Mechanical Engineers (7492 documents)
example document: Proceedings of the Eighth Symposium on Thermophysical Properties
Materials Division, A S M E. (15 documents)
example document: Critical issues in materials and mechanical engineering
example document: Emerging technologies in aerospace structures, design, structural dynamics, and materials
|
K. M. Liechti
S. Mall
American Society of Mechanical Engineers. Materials Division (45 documents)
example document: New directions in the nondestructive evaluation of advanced materials
American Society of Mechanical Engineers (7492 documents)
example document: Proceedings of the Eighth Symposium on Thermophysical Properties
Materials Division, A S M E. (15 documents)
example document: Critical issues in materials and mechanical engineering
Research needs in dynamic systems and control
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002551818 / 1989-05-01
Date of Publication:
April 3, 1989
Date of Creation:
1989
Title:
Research needs in dynamic systems and control : v. 4, Machine dynamics / prepared by the Select Panel on Research Goals and Priorities in Machine Dynamics ; edited by A. H. Soni.
Imprint:
New York : American Society of Mechanical Engineers, c1989.
Description:
37 p.
Number of similar titles:
4
Variant title:
Research needs in dynamic systems and control : v. 4
Other Title:
Machine dynamics
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
A. H. Soni
American Society of Mechanical Engineers. Select Panel on Research Goals and Priorities in Machine Dynamics
American Society of Mechanical Engineers (7492 documents)
example document: Industrial power flexibility in a changing economy
Select Panel on Research Goals and Priorities in Machine Dynamics.
|
American Society of Mechanical Engineers. Select Panel on Research Goals and Priorities in Machine Dynamics
American Society of Mechanical Engineers (7492 documents)
example document: Industrial power flexibility in a changing economy
Select Panel on Research Goals and Priorities in Machine Dynamics.
1989 A S M E Cogen-Turbo
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002685384 / 1989-10-10
Date of Publication:
August 11, 1989
Date of Creation:
1989
Title:
1989 A S M E Cogen-Turbo : 3rd International Symposium on Turbomachinery, Combined-Cycle Technologies and Cogeneration, held in Nice, France, August 30-September 1, 1989 / edited by G. K. Serovy, T. H. Fransson, J. Farbi ; sponsored by the A S M E International Gas Turbine Institute.
Series:
IGTI;v.4
Imprint:
New York : ASME, c1989.
Description:
502 p.
Other Title:
I G T I ;v.4
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
J. Farbi
T. H. Fransson
G. K. Serovy
American Society of Mechanical Engineers. International Gas Turbine Institute
International Symposium on Turbomachinery, Combined-Cycle Technologies and Cogeneration, Nice, France, 1989
American Society of Mechanical Engineers (7492 documents)
example document: Bioprocess Engineering Symposium--1988
ASME International Gas Turbine Institute
Turbomachinery, Combined-Cycle Technologies and Cogeneration, International Symposium on
ASME Cogen-Turbo, 1989
T. H. Fransson
G. K. Serovy
American Society of Mechanical Engineers. International Gas Turbine Institute
International Symposium on Turbomachinery, Combined-Cycle Technologies and Cogeneration, Nice, France, 1989
American Society of Mechanical Engineers (7492 documents)
example document: Bioprocess Engineering Symposium--1988
ASME International Gas Turbine Institute
|
Turbomachinery, Combined-Cycle Technologies and Cogeneration, International Symposium on
ASME Cogen-Turbo, 1989
Ash handling, disposal, and utilization from coal fired fluidized bed boilers
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002732204 / 1990-01-18
Date of Publication:
October 13, 1989
Date of Creation:
1989
Title:
Ash handling, disposal, and utilization from coal fired fluidized bed boilers : presented at the 1989 Joint Power Generation Conference, Dallas, Texas, October 22-26, 1989 / sponsored by the Fuels Handling, Transportation, and Storage Technical Committee of the Fuels and Combustion Technologies Division, ASME ; edited by T. M. Nechvatal.
Series:
FACT ; v. 6
Description:
1 v.
Other Title:
FACT ; v.6
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
T. M. Nechvatal
American Society of Mechanical Engineers. Fuels and Combustion Technologies Division. Fuels ... Committee
Joint Power Generation Conference, Dallas, 1989 (1 documents)
example document: Lastest advances in steam turbine design, blading, repairs, condition assessment, and condenser interaction
American Society of Mechanical Engineers (7492 documents)
example document: Wave propagation in homogeneous media and ultrasonic nondestructive evaluation
Fuels Handling, Transportation, and Storage Committee of the Fuels ... Division, ASME.
American Society of Mechanical Engineers. Fuels and Combustion Technologies Division. Fuels ... Committee
Joint Power Generation Conference, Dallas, 1989 (1 documents)
example document: Lastest advances in steam turbine design, blading, repairs, condition assessment, and condenser interaction
American Society of Mechanical Engineers (7492 documents)
example document: Wave propagation in homogeneous media and ultrasonic nondestructive evaluation
Fuels Handling, Transportation, and Storage Committee of the Fuels ... Division, ASME.
Computers in engineering, 1989
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002736224 / 1990-01-18
Date of Publication:
November 10, 1989
Date of Creation:
1989
Title:
Computers in engineering, 1989 : vol. one : proceedings of the 1989 ASME International Computers in Engineering Conference and Exposition, July 30-August 3, 1989, Anaheim, California / sponsored by Computers in Engineering Division, ASME ; editors, D. R. Riley, T. J. Cokonis ; associate editors, G. Gabriel ... [et al.]
Description:
1 v.
Variant title:
Computers in engineering, 1989 : vol. one
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
G. Gabriel
T. J. Cokonis (4 documents)
example document: Computers in engineering 1982
D. R. Riley
ASME International Computers in Engineering Conference and Exposition, Anaheim, Calif., 1989
American Society of Mechanical Engineers (7492 documents)
example document: ASME boiler and pressure vessel code
American Society of Mechanical Engineers. Computers in Engineering Division (16 documents)
example document: Symbolic computations and their impact on mechanics
T. J. Cokonis (4 documents)
example document: Computers in engineering 1982
|
D. R. Riley
ASME International Computers in Engineering Conference and Exposition, Anaheim, Calif., 1989
American Society of Mechanical Engineers (7492 documents)
example document: ASME boiler and pressure vessel code
American Society of Mechanical Engineers. Computers in Engineering Division (16 documents)
example document: Symbolic computations and their impact on mechanics
|
Microstructural development and control in materials processing
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002761555 / 1990-02-26
Date of Publication:
December 5, 1989
Date of Creation:
1989
Title:
Microstructural development and control in materials processing : presented at the winter annual meeting of the American Society of Mechanical Engineers, San Francisco, California, December 10-15, 1989 / sponsored by the Materials Division, ASME ; edited by D. R. Durham, A. Saigal.
Series:
MD ; v. 14
Description:
1 v.
Other Title:
MD ; v. 14
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
A. Saigal
D. R. Durham
American Society of Mechanical Engineers. Materials Division (45 documents)
example document: Material-environment interactions in structural and pressure containment service
American Society of Mechanical Engineers (7492 documents)
example document: Acoustic emission monitoring of pressurized systems: a symposium sponsored by A S T M Committee E07 on Nondestructive Testing, American Society for Testing and Materials [in cooperation with the American Society of Mechanical Engineers and the American Society of Nondestructive Testing], Ft. Lauderdale, Fla., 25-26 Jan. 1979
Materials Division, ASME. (4 documents)
example document: Mechanics of wood and paper materials
D. R. Durham
American Society of Mechanical Engineers. Materials Division (45 documents)
example document: Material-environment interactions in structural and pressure containment service
American Society of Mechanical Engineers (7492 documents)
example document: Acoustic emission monitoring of pressurized systems: a symposium sponsored by A S T M Committee E07 on Nondestructive Testing, American Society for Testing and Materials [in cooperation with the American Society of Mechanical Engineers and the American Society of Nondestructive Testing], Ft. Lauderdale, Fla., 25-26 Jan. 1979
Materials Division, ASME. (4 documents)
example document: Mechanics of wood and paper materials
Machining characteristics of advanced materials
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002767997 / 1990-02-26
Date of Publication:
December 5, 1989
Date of Creation:
1989
Title:
Machining characteristics of advanced materials : presented at the winter annual meeting of the American Society of Mechanical Engineers, San Francisco, California, December 10-15, 1989 / sponsored by the Materials Division, ASME ; edited by M. Ramulu, M. Hashish.
Series:
MD ; v. 16
Description:
1 v.
Other Title:
MD ; v. 16
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
collective work: the American Society of Mechanical Engineers, employer for hire.
Names:
M. Hashish
M. Ramulu (3 documents)
example document: Machining composites
American Society of Mechanical Engineers. Materials Division (45 documents)
example document: Visco-plastic behavior of new material
American Society of Mechanical Engineers (7492 documents)
example document: Fatigue, fracture, and risk, 1992
M. Ramulu (3 documents)
example document: Machining composites
|
American Society of Mechanical Engineers. Materials Division (45 documents)
example document: Visco-plastic behavior of new material
American Society of Mechanical Engineers (7492 documents)
example document: Fatigue, fracture, and risk, 1992
Micromechanics
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002768300 / 1990-02-26
Date of Publication:
December 5, 1989
Date of Creation:
1989
Title:
Micromechanics : experimental techniques : presented at the winter annual meeting of the American Society of Mechanical Engineers, San Francisco, California, December 10-15, 1989 / sponsored by the Experimental Mechanics Committee of the Applied Mechanics Division, ASME ; edited by W. N. Sharpe, Jr.
Series:
AMD ; v. 102
Number of similar titles:
22
Similar Title:
Other Title:
AMD ; v. 102
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
Sharpe, W. N., Jr.
American Society of Mechanical Engineers. Applied Mechanics Division. Experimental Mechanics Committee
American Society of Mechanical Engineers (7492 documents)
example document: Computational mechanics advances and trends presented at the winter annual meeting of the American Society of Mechanical Engineers, Anaheim, California, December 7-12, 1986
Experimental Mechanics Committee of the Applied Mechanics Division, ASME
American Society of Mechanical Engineers. Applied Mechanics Division. Experimental Mechanics Committee
American Society of Mechanical Engineers (7492 documents)
example document: Computational mechanics advances and trends presented at the winter annual meeting of the American Society of Mechanical Engineers, Anaheim, California, December 7-12, 1986
Experimental Mechanics Committee of the Applied Mechanics Division, ASME
Numerical techniques in acoustic radiation
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002772248 / 1990-02-26
Date of Publication:
December 5, 1989
Date of Creation:
1989
Title:
Numerical techniques in acoustic radiation : presented at the winter annual meeting of the American Society of Mechanical Engineers, San Francisco, Calif., Dec. 10-15, 1989 / sponsored by the Noise Control and Acoustics Division, ASME Analysis Techniques in Acoustics Committee ; edited by R. J. Bernhard, R. F. Keltie.
Series:
NCA ; v. 6
Other Title:
NCA ; v. 6
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
the American Society of Mechanical Engineers, employer for hire.
Names:
R. F. Keltie
R. J. Bernhard
American Society of Mechanical Engineers. Noise Control and Acoustics Division. Analysis Techniques in Acoustics ....
American Society of Mechanical Engineers (7492 documents)
example document: Heat transfer in gas turbines
Noise Control and Acoustics Division, ASME Analysis Techniques in Acoustics ....
R. J. Bernhard
American Society of Mechanical Engineers. Noise Control and Acoustics Division. Analysis Techniques in Acoustics ....
American Society of Mechanical Engineers (7492 documents)
example document: Heat transfer in gas turbines
Noise Control and Acoustics Division, ASME Analysis Techniques in Acoustics ....
Computational structural mechanics and multidisciplinary optimization
Type of Work:
Non-dramatic literary work
Registration Number / Date:
TX0002789747 / 1990-04-09
Date of Publication:
December 5, 1989
Date of Creation:
1989
Title:
Computational structural mechanics and multidisciplinary optimization : presented at the winter annual meeting of the American Society of Mechanical Engineers, San Francisco, California, December 10-15, 1989 / sponsored by the Aerospace Division, ASME ; edited by R. V. Grandhi, W. J. Stroud, V. B. Venkayya.
Series:
AD ; v. 16
Description:
1 v.
Other Title:
AD ; v. 16
Copyright Claimant:
the American Society of Mechanical Engineers
Authorship on Application:
collective work: the American Society of Mechanical Engineers, employer for hire.
Names:
V. B. Venkayya
W. J. Stroud
R. V. Grandhi
American Society of Mechanical Engineers. Aerospace Division (30 documents)
example document: Advances in composite materials and structures
American Society of Mechanical Engineers (7492 documents)
example document: 1978 advances in bioengineering
W. J. Stroud
R. V. Grandhi
American Society of Mechanical Engineers. Aerospace Division (30 documents)
example document: Advances in composite materials and structures
American Society of Mechanical Engineers (7492 documents)
example document: 1978 advances in bioengineering
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible. Multiple persons can share the same name.